cancel
Showing results for 
Search instead for 
Did you mean: 

Separating 5GHz from 2.4GHz - sync option missing?

wmountford
Newbie
Posts: 2
Registered: ‎16-01-2022

Separating 5GHz from 2.4GHz - sync option missing?

I'm trying to set my 5GHz and 2.4GHz wifi channels as separately named networks, so as to sort high and low traffic devices appropriately.

However, the advice i've seen so far all says 'enter Advanced wireless settings, and turn off syncing of networks'. I may be blind to the obvious, but i cannot see the relevant toggle.

4 REPLIES 4
Mustrum
Community Veteran
Posts: 3,545
Thanks: 1,051
Fixes: 76
Registered: ‎13-08-2015

Re: Separating 5GHz from 2.4GHz - sync option missing?

It can’t be done on the Hub2.

wmountford
Newbie
Posts: 2
Registered: ‎16-01-2022

Re: Separating 5GHz from 2.4GHz - sync option missing?

Oh. Well then. That's a shame.

dvorak
Moderator
Moderator
Posts: 29,456
Thanks: 6,615
Fixes: 1,482
Registered: ‎11-01-2008

Re: Separating 5GHz from 2.4GHz - sync option missing?


Moderators Note


This topic has been moved from Fibre to My Router

Customer / Moderator
If it helped click the thumb
If it fixed it click 'This fixed my problem'
Baldrick1
Moderator
Moderator
Posts: 11,485
Thanks: 5,108
Fixes: 412
Registered: ‎30-06-2016

Re: Separating 5GHz from 2.4GHz - sync option missing?

@wmountford 

See here for an option.  https://community.plus.net/t5/Tech-Help-Software-Hardware-etc/Separate-Bands-with-a-Smarthub-2-or-Pl...

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'