cancel
Showing results for 
Search instead for 
Did you mean: 

Fairly confused

gardent
Hooked
Posts: 7
Thanks: 1
Registered: ‎04-12-2025

Re: Fairly confused

I am sorry for not getting back before now. I have some totally unrelated hassle keeping me busy, so this will just be a quickie.
Thank you for the comments @jab1, the old router is an elderly Plusnet Technicolour. I took a quick look at the email threads which mostly seem to refer to a slightly different error message, but it can still wait until after 'fibre-day' which should be Wednesday. Fingers crossed!

jab1
The Full Monty
Posts: 24,427
Thanks: 8,700
Fixes: 374
Registered: ‎24-02-2012

Re: Fairly confused

@gardent The Technicolor (582N?) would not work with FTTP as it is only  ADSL capable. However, if you have the HUB2,  you can substitute that now.

I would be interested to see where it says it only works with FTTP, as that is totally incorrect.

John
Baldrick1
Moderator
Moderator
Posts: 14,352
Thanks: 7,259
Fixes: 472
Registered: ‎30-06-2016

Re: Fairly confused


@gardent wrote:

I thought we might be able to change to the new router in advance of the fibre fitting, but the instructions imply it only works with an ONT so we haven't done that.


As @jab1  writes, the Hub 2 works with both ADSL/FTTC services and Full Fibre. 

The difference is in the cables that are provided with the hub. A Full Fibre Hub 2 should come with two Ethernet cables, one with red connectors, the other yellow. These are only colour coded to make the instructions simple, They are both identical and standard Cat 5e flexible cables. The other version of Hub 2 includes a DSL cable and a single yellow ended Ethernet cable.

If you look at the back of the Hub 2 you will see two input sockets, one labelled DSL the other WAN. If you plug the DSL cable currently plugged into your old hub into the Hub 2 DSL socket it will get you on line. When Full Fibre arrives you simply remove the DSL cable and connect the red ended WAN cable between the new ONT and Hub WAN socket.

N.B. If the Hub 2 did not come with the WAN cable you can use any CAT 5e Ethernet cable. This can, if you want to site the Hub elsewhere, be up to 100m long.

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

reful
Dabbler
Posts: 20
Thanks: 7
Registered: ‎02-12-2025

Re: Fairly confused

Can someone please advise what happen to my post from this thread.

 

Nobody told me there was a problem with it, yet it seems to have been hidden

 

I am still subscribed to it which I did not do but was automatic when I made my post.

 

If there is a moderator who would like to explain (own up) I would appreciate it as now I am the person who is fairly confused!

jab1
The Full Monty
Posts: 24,427
Thanks: 8,700
Fixes: 374
Registered: ‎24-02-2012

Re: Fairly confused

@reful When did you make the post? The chances are it got caught by the automatic spam filter for some reason - no doubt it will get released when one of the mods does a check.

John
Baldrick1
Moderator
Moderator
Posts: 14,352
Thanks: 7,259
Fixes: 472
Registered: ‎30-06-2016

Re: Fairly confused

@reful 

No conspiracy by Moderators, it was simply caught by the automatic spam filter. I have now released it.

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

MisterW
Superuser
Superuser
Posts: 19,706
Thanks: 8,757
Fixes: 569
Registered: ‎30-07-2007

Re: Fairly confused

@reful 

In fact my advice would be to move your number first so that your number does not get lost in the BB migration by some staff or website error, it is  your number and you have full rights to it.

That is really bad advice! Moving the number first will cease the existing broadband service and close the Plusnet account.

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

reful
Dabbler
Posts: 20
Thanks: 7
Registered: ‎02-12-2025

Re: Fairly confused

"

That is really bad advice! Moving the number first will cease the existing broadband service and close the Plusnet

Thanks for that input, the feedback I have seen is that people have lost their number when they sign up for an alternative service but do not ask for a Landline (because they do not want the outrageous fees for Landlines and they do not want to be locked into those fees for 2 years). 
 
If you are going to leave BT anyway, then it makes sense to me to protect what you care about, the number.
 
If the BB is ended then you just take out the offer on MSE for the deal that suits and they can treat it as a new premises.
 
I had three neighbours who had no broadband, they were in a social housing block on the estate, I told about social tariff and two of them ordered it at the same time.  One had previously been with Sky but ended contract some years ago, the other had a contract with another ISP on Fibre.  The latter had almost immediate install, no visit needed, the Sky customer needed a visit and had to wait 13 days.
 
So in these circumstances, given the choice of having no broadband for several weeks (which sounds likely for OP if they are rural anyway) but keeping the number, I would choose the latter if I cared about the number.
 
If you have a better way of separating the number without entering into a contract then I would be interested to hear it.  When I had VoIP I found it very easy to move numbers to different companies. I would imagine that their is an OFCOM rule on this that specifies how numbers may be moved without affecting the broadband.
 
For example some people might cancel a digital voice service without ending their Broadband.  I stand by my advice, get number moved first.
 
 
 
jab1
The Full Monty
Posts: 24,427
Thanks: 8,700
Fixes: 374
Registered: ‎24-02-2012

Re: Fairly confused

@reful If the number is already with a VOIP provider, you can move it whenever you like. However, if it is still in the Openreach network, then, as @MisterW  says, moving it first will terminate both phone and broadband, as they are linked.

John
MisterW
Superuser
Superuser
Posts: 19,706
Thanks: 8,757
Fixes: 569
Registered: ‎30-07-2007

Re: Fairly confused

If you have a better way of separating the number without entering into a contract 

without entering a contract, No.

You need to unlink the landlines from the broadband by changing  to a broadband only contract such as SoGea or FTtp. That would start a new contract but puts the number into quarantine and you them have 30 days to port the number to z void provider

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

MisterW
Superuser
Superuser
Posts: 19,706
Thanks: 8,757
Fixes: 569
Registered: ‎30-07-2007

Re: Fairly confused

to z void provider

that should read 'a voip provider'

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.