AMPLIFI HD, verify IPv4 configuration

Grenolad · ‎09-01-2019

Hope someone can help.
yesterday I got a Amplifi HD mesh router, to help with my poor signal in my house. But when setting up, on the AmpliFi hd app it found some issues detected.
Please verify IPV4 configuration
Is this to do with plusnet or amplify hd ?

Please help
Thanks lee

VileReynard · ‎01-09-2007

You are attempting to connect two routers back-to-back (I think).

Provided you don't have a Hub 1 router, you would have to put it in bridge mode (the Hub 1 router can't be put in bridge mode).

Does your new router do DHCP, NAT etc?

"In The Beginning Was The Word, And The Word Was Aardvark."

MisterW · ‎30-07-2007

It's been sorted over here https://community.plus.net/t5/My-Router/Verify-IPv4-configuration-AMPLIFI-HD/m-p/1604717#M9582

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

dvorak · ‎11-01-2008

Moderators Note

This topic has been locked in favour of linked topic above.

Customer / Moderator
If it helped click the thumb
If it fixed it click 'This fixed my problem'