This needs correcting

[#1]

http://www.plus.net/support/broadband/products/IP_addresses_broadband.shtml

Quote

3. How to switch between a dynamic & static IP Plusnet Unlimited / Unlimited Fibre Go to Add-Ons, which you'll find under Connection Settings in My Account From here, you can see your current IP address settings. Switch between static and dynamic by clicking the button. Please note:     There's a £5 setup fee to activate a Static IP     You'll need to reboot your router before the change takes effect     If you remove a Static IP, you're unlikely to get the same address if you switch back in the future     Add-Ons will not appear for accounts where switching is not available

You do not need to reboot the router - a simple disconnect/reconnect will do it

[#2]

That's what I did Oldjim, but I wanted to point to the help file.

[#3]

Thanks for the suggestion Jim,
This has been discussed quite a bit before. The reason we've mentioned a reboot rather than a soft disconnect/reconnect as advising customers on mass to do that could drive a lot of support requests our way for advice on how to log into the router and do that.
Also we're happy that an occasional/one-off reboot shouldn't have any negative impact.

[#4]

Jim,
It's written that way so when people complain about slow speeds they can fob them off by blaming them for rebooting the router!