cancel
Showing results for 
Search instead for 
Did you mean: 

Vigor 167 setup for VDSL2

FIXED
Kayman
Newbie
Posts: 2
Registered: ‎06-11-2023

Vigor 167 setup for VDSL2

Hi, Has anyone successfully setup Vigor 167 with Plusnet VDSL2. Can you please share your setup.

4 REPLIES 4
Mustrum
Community Veteran
Posts: 3,634
Thanks: 1,074
Fixes: 77
Registered: ‎13-08-2015

Re: Vigor 167 setup for VDSL2

Kayman
Newbie
Posts: 2
Registered: ‎06-11-2023

Re: Vigor 167 setup for VDSL2

Great many thanks, looks like I have the non UK version, I will order the 167-K (UK) and try again.

dvorak
Moderator
Moderator
Posts: 29,701
Thanks: 6,588
Fixes: 1,485
Registered: ‎11-01-2008

Re: Vigor 167 setup for VDSL2


Moderators Note


This topic has been moved from Full Fibre to My Router

Customer / Moderator
If it helped click the thumb
If it fixed it click 'This fixed my problem'
RealAleMadrid
Aspiring Hero
Posts: 2,803
Thanks: 1,464
Fixes: 59
Registered: ‎07-07-2009

Re: Vigor 167 setup for VDSL2

Fix

@Kayman  Think you are being a bit hasty, as far as I can see from the Draytek website there are no different hardware versions of this device. the 167-K version just has firmware with default configuration for Openreach VDSL2 in the UK. 

The BT forum link is not helpful at all, the so called expert who admits to making a lot of mistakes says you need the UK version with no explanation as to why. I would ignore this kind of useless advice.

The V167 is very flexible and can be configured in many ways but by default it is a simple modem which you connect to your router which would be set up with a PPPoE WAN connection and your PLusnet username and password.

The particular part of the modem configuration for Openreach VDSL2 is a service VLAN tag of 101, have a look at the quick start guide for more info.

Vigor 167 Quick Start Guide 

I'm sure your Vigor 167 can be set up to work correctly with Plusnet