Settings for TP-Link AX5400 (AX73) to use as only router for WiFi and Ethernet

Diaseb · Friday

Hi there,

I have the router TP-Link AX5400 (AX73), which has been working perfectly using only the wifi connection; however, I am trying to set up the Ethernet connection, and I do not know which settings I need to use it. Any advice is more than welcome.

MisterW · ‎30-07-2007

If you're on Full Fibre and talking about connecting the AX5400 directly to the ONT then connect its WAN port to the ONT

If you're on part Fibre then set the HUb 2 to Bridge mode and connect the AX5400 to one of the Hub 2 's LAN ports

In both cases the settings you need for the AX5400 WAn are here https://www.plus.net/help/broadband/broadband-connection-settings/ , you need the 'what settings should I use for a fibre router that's connected to a BT openreach modem'

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

Settings for TP-Link AX5400 (AX73) to use as only router for WiFi and Ethernet

Settings for TP-Link AX5400 (AX73) to use as only router for WiFi and Ethernet

Re: Settings for TP-Link AX5400 (AX73) to use as only router for WiFi and Ethernet