cancel
Showing results for 
Search instead for 
Did you mean: 

Plusnet fibre with ax3000

FIXED
Jonny_doe
Newbie
Posts: 2
Registered: ‎02-05-2024

Plusnet fibre with ax3000

Hello just got plusnet fibre 74 , with the hub 2 , but wifi isn't much good , so I got a tp-link ax3000 router ..
I put the hub 2 into bridging mode
And plug a patch lead into wan both router and hub 2 ..
On the tp-link , I put the connection to pppoe and set "my username@plusdsl.net and my password to get into my account , but the router won't connect to the Internet...
What am I doing wrong ?Huh
2 REPLIES 2
Dan_the_Van
Aspiring Hero
Posts: 2,770
Thanks: 1,328
Fixes: 84
Registered: ‎25-06-2007

Re: Plusnet fibre with ax3000

Fix

@Jonny_doe welcome to the community

You need to connect to one of the LAN ports on the Hub Two NOT the WAN port

HTH

Edit: I am assuming this a copper connection, if you are Full Fibre then you do not need the Hub two you connect the AX3000 WAN port to the ONT.

Jonny_doe
Newbie
Posts: 2
Registered: ‎02-05-2024

Re: Plusnet fibre with ax3000

Yes the plugged into LAN worked , thanks for your help 👍