Hub swap

[#1]

I presume without going on the management system the hub won’t get firmware updates ?

That is correct but there has not been one since June 2023 currently

Firmware version:v0.10.00.04201-PN

Firmware updated:30-Jun-2023

[#2]

@Markwallwork0 / @Dan_the_Van  It should be possible, and is advisable, to get it back on the Management Platform if you intend to continue using it. Maybe @Marsh  can get it arranged.

[#3]

@jab1 

I have already suggested in message 13 about adding the Hub to TR069

Maybe you missed my post

[#4]

Thanks this once I’ve swapped it for isn’t at that version . Strange as it was sent end of 2023

[#5]

---

@Dan_the_Van wrote:

@jab1 

I have already suggested in message 13 about adding the Hub to TR069

Maybe you missed my post

---

I missed the edit, @Dan_the_Van .😀

[#6]

---

@Markwallwork0 wrote:
Thanks this once I’ve swapped it for isn’t at that version . Strange as it was sent end of 2023

---

Can you explain that, please - it doesn't quite make sense to me?

[#7]

@jab1  

The Hub-2 received at the end of 2023 didn't have the latest (June 2023) firmware installed.

(at least that is how I read it ?)

.

[#8]

@outcast OK, but if it gets put on the platform, that firmware pushed it - if it doesn't, then that can be arranged.

[#9]

@Markwallwork0 

It is the firmware version number to be concerned about, rather than the date it was applied.

So on the Hub two  Advanced Settings >Information > Firmware version > v0.10.00.04201-PN

HTH

[#10]

Correct I initially got a hub for a fttp install which got cancelled due to a blocked duct no timeframe and me having no service as bt had ceased my line . This hub was delivered end of 23 and does not have the latest firmware . This is the hub I have now connected to my fttc dsl connection following advise from Plusnet Helpdesk . My hub I’ve decommissioned this morning has the latest 2023 firmware and was delivered a week or two after the one I am now using

[#11]

@Markwallwork0 What firmware version does this Hub have? I doubt it will have any real effect on day-to-day use, whichever it is, but as said previously, once it is back on the management platform, it should be possible to update it.

[#12]

VO.08.00.08297-PN

Firmware on hub

[#13]

So, only one version back. Solvable as stated previously.

[#14]

This was the date I was update to that version.

Firmware version: v0.08.00.08297-PN
Firmware updated: 31-Oct-2022