cancel
Showing results for 
Search instead for 
Did you mean: 

Hub Two - Wireless Wont Turn Off

FIXED
neilbradley
Dabbler
Posts: 19
Thanks: 1
Fixes: 1
Registered: ‎11-12-2012

Hub Two - Wireless Wont Turn Off

So I've finally got my brand spanking new Hub Two so I can retire the ancient TG582n.

I sometimes need to turn the wifi off however when I tested this (turning off both 2.5GHz and 5GHz) the hub still sends a strong signal out.

Does anyone know if this is essentially just turning the SSID off rather than actually turning the wifi signal itself off?  Not sure if this is a fault or how it's meant to work.

6 REPLIES 6
Baldrick1
Moderator
Moderator
Posts: 12,378
Thanks: 5,559
Fixes: 430
Registered: ‎30-06-2016

Re: Hub Two - Wireless Wont Turn Off

Fix

@neilbradley 

This is a known 'feature' that will hopefully be removed on a future firmware update. It carries no traffic.

Moderators Note

This topic has been moved from Full Fibre to My Router

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

neilbradley
Dabbler
Posts: 19
Thanks: 1
Fixes: 1
Registered: ‎11-12-2012

Re: Hub Two - Wireless Wont Turn Off

@Baldrick1 thanks for the quick reply, appreciated.

That's a shame it doesn't truly turn it off.  Do you know how firmware updates happen?  I did think of this initially but couldn't see any way to update the firmware in the settings (I appreciate the 'fix' for this isn't out there yet as you said, but curious how I would update it).

jab1
Legend
Posts: 19,120
Thanks: 6,272
Fixes: 288
Registered: ‎24-02-2012

Re: Hub Two - Wireless Wont Turn Off

Hub firmware updates are rolled out by Plusnet automatically, you cannot do them 'manually'

John
Baldrick1
Moderator
Moderator
Posts: 12,378
Thanks: 5,559
Fixes: 430
Registered: ‎30-06-2016

Re: Hub Two - Wireless Wont Turn Off

@neilbradley 

There's currently no timeframe. Firmware updates are automatically downloaded to your hub as and when they are released, so you do not need to do anything. This transmission is a left over from the design of the BT Smarthub 2, on which the Plusnet Hub 2 is based. It is associated with the mesh backhaul for remote disks, a feature that is only supported on the BT version.

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

neilbradley
Dabbler
Posts: 19
Thanks: 1
Fixes: 1
Registered: ‎11-12-2012

Re: Hub Two - Wireless Wont Turn Off

Ok thanks for the replies chaps.

bobpullen
Community Gaffer
Community Gaffer
Posts: 16,930
Thanks: 5,016
Fixes: 317
Registered: ‎04-04-2007

Re: Hub Two - Wireless Wont Turn Off

@neilbradley - I'm expecting an update over the next month or so that will address this.

Bob Pullen
Plusnet Product Team
If I've been helpful then please give thanks ⤵