cancel
Showing results for 
Search instead for 
Did you mean: 

DLM Reset

Bond02
Newbie
Posts: 1
Registered: ‎10-12-2025

DLM Reset

Hello


I have had Plusnet FTTC for a while after switching from TalkTalk and the speed had always remained stable until a few days ago, the hub suddenly turned orange and went on a loop of resetting every few minutes for a couple of hours. The diagnostic bot found a fault with the line but when I tried calling I couldn’t get through to anyone. Is it possible to have the DLM reset as the speed has now plummeted down to less than half what I was getting previously and most services like Netflix are now unusable due to constant buffering


Thanks
2 REPLIES 2
DJMcKenzie87
Grafter
Posts: 35
Thanks: 11
Fixes: 1
Registered: ‎12-07-2024

Re: DLM Reset

You clearly have a fault-use the bot to report it: https://www.plus.net/help/report-a- problem/
Plusnet Hub2WiFi Hub IPv6 Status:Enabled IPv6 network status:Enabled

IPv6 WAN detailsGlobal unicast address: AvailableGlobal unicast prefix /56 length:AvailableLink local address:AvailableRemote link local address:AvailableDNS:IPv4 only

GUI version:1.9 16_08_2022
Firmware version:v0.10.00.04201-PN
jab1
The Full Monty
Posts: 22,820
Thanks: 8,005
Fixes: 334
Registered: ‎24-02-2012

Re: DLM Reset

@Bond02 If the bot found a fault - what was the fault, and what was the suggested course of action? A DLM reset without a fault resolution is pointless.

John