Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Use own router Vigor 2860n
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Plusnet Community
- :
- Forum
- :
- Help with my Plusnet services
- :
- Fibre Broadband
- :
- Use own router Vigor 2860n
Use own router Vigor 2860n
24-02-2015 3:03 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Just about to switch to fibre
I want to use my own router (Vigor 2860n) in place of the supplied Sagemcom 2740N.
Are the basic settings required for PN fibre documented somewhere please?
I want to use my own router (Vigor 2860n) in place of the supplied Sagemcom 2740N.
Are the basic settings required for PN fibre documented somewhere please?
Message 1 of 2
(2,012 Views)
1 REPLY 1
Re: Use own router Vigor 2860n
24-02-2015 3:27 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
WAN >> General Setup
WAN1 = Enable
DSL Mode = VDSL ONLY.
VLAN Tag insertion (VDSL): Enable
Tag Value = 101
Priority = 0
Active Mode = Always On.
WAN >> Internet Access
Access Mode = PPPoE / PPPoA
Details Page;
Enable - Checked
Modem Settings (for ADSL only)
Multi-PVC channel - Channel 1
VPI = 0, VCI = 38
Encapsulating Type = VC MUX
Protocol = PPPoE
Modulation = Multimode
MTU
MTU = 1442
ISP Access Setup
Username & Password - What you use to sign into the Plusnet website.
PPP Authentication = PAP or CHAP
IP Address From ISP
Fixed IP = No (Dynamic IP)
That should be it.
WAN1 = Enable
DSL Mode = VDSL ONLY.
VLAN Tag insertion (VDSL): Enable
Tag Value = 101
Priority = 0
Active Mode = Always On.
WAN >> Internet Access
Access Mode = PPPoE / PPPoA
Details Page;
Enable - Checked
Modem Settings (for ADSL only)
Multi-PVC channel - Channel 1
VPI = 0, VCI = 38
Encapsulating Type = VC MUX
Protocol = PPPoE
Modulation = Multimode
MTU
MTU = 1442
ISP Access Setup
Username & Password - What you use to sign into the Plusnet website.
PPP Authentication = PAP or CHAP
IP Address From ISP
Fixed IP = No (Dynamic IP)
That should be it.
Message 2 of 2
(1,419 Views)
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Plusnet Community
- :
- Forum
- :
- Help with my Plusnet services
- :
- Fibre Broadband
- :
- Use own router Vigor 2860n