WAN >> General Setup
WAN1 = Enable
DSL Mode = VDSL ONLY.
VLAN Tag insertion (VDSL): Enable
Tag Value = 101
Priority = 0
Active Mode = Always On.
WAN >> Internet Access
Access Mode = PPPoE / PPPoA
Details Page;
Enable - Checked
Modem Settings (for ADSL only)
Multi-PVC channel - Channel 1
VPI = 0, VCI = 38
Encapsulating Type = VC MUX
Protocol = PPPoE
Modulation = Multimode
MTU
MTU = 1442
ISP Access Setup
Username & Password - What you use to sign into the Plusnet website.
PPP Authentication = PAP or CHAP
IP Address From ISP
Fixed IP = No (Dynamic IP)
That should be it.
