cancel
Showing results for 
Search instead for 
Did you mean: 

Static IP not working...

FIXED
va1
Newbie
Posts: 4
Thanks: 1
Registered: a month ago

Static IP not working...

Recently I wanted to use the Static IP which I have paid since the start of my contract for work...

 

First I called customer support and they told me since I am not using a PN router they cant help me with the router settings. For reference I employ a AC86u. I was looking over the PN website for any instructions for third party routers and I didn't found anything. In a previous ISP I didn't need to change any settings in the router, could someone please point me to the right direction regarding 3rd party router settings for static IP?

 

Second, I went over to my account settings and on the Static IP details it says -> Current Status: You are currently using a dynamic IP address. No other options .... that means that the Static IP is not even set, right? So, I can only have a Static IP if I use a PN router?

 

Thank you for your time!

 

 

Tags (1)
8 REPLIES 8
jab1
Legend
Posts: 18,529
Thanks: 6,024
Fixes: 279
Registered: ‎24-02-2012

Re: Static IP not working...

@va1 Welcome to the forum. When you say 'Recently I wanted to use the Static IP which I have paid since the start of my contract for work...', do you mean you have at some point in the past paid the one-off £5.00 fee for a static IP, but for some reason never checked that it is active previously?

Your router settings in this case are as they always have been, so I don't see a problem there.
 
 
You can use a static IP with any router, providing you have ordered, paid for one, and ensured it is activated.

 

John
va1
Newbie
Posts: 4
Thanks: 1
Registered: a month ago

Re: Static IP not working...

Yes, when I signed the contract I payed the £5 for a Static IP. I can also confirm that by checking my profiles on the PN website. I assumed that was enabled by default and didn't need to do anything else, but I recently figured out that if my router loses power and restarts it gets a new IP.

Good to know that I don't need to mess up with settings on my end. Now I need someone from PN to figure out why its not enabled!

jab1
Legend
Posts: 18,529
Thanks: 6,024
Fixes: 279
Registered: ‎24-02-2012

Re: Static IP not working...

When did you start with PN?

John
va1
Newbie
Posts: 4
Thanks: 1
Registered: a month ago

Re: Static IP not working...

18th of January, I was looking over my Router logs and only restarted my router twice for the last 8 months. That's why I never noticed! Smiley

jab1
Legend
Posts: 18,529
Thanks: 6,024
Fixes: 279
Registered: ‎24-02-2012

Re: Static IP not working...

@va1 OK. This looks like one that slipped through the net. I understand - but could be wrong - that the static should be applied automatically when the account goes live, in this situation.

@MisterW  - any comments?

John
Gandalf
Community Gaffer
Community Gaffer
Posts: 26,619
Thanks: 10,175
Fixes: 1,606
Registered: ‎21-04-2017

Re: Static IP not working...

Fix

I think I've fixed this; the static IP wasn't assigned to the connection. I've removed and re-added it, which now shows correctly. As a result, there will be a duplicate charge on your next bill, but I'll make sure that's credited. 

If you can reboot your router, or do a single disconnect/reconnect of the PPP session within your router’s interface, it should now pick up a static IP. 

Sorry for the inconvenience! Let me know if there are any further issues. 

From 31st October 2022, I no longer have a regular presence here as I’ve moved on to a new role.
Anoush Mortazavi
Plusnet
jab1
Legend
Posts: 18,529
Thanks: 6,024
Fixes: 279
Registered: ‎24-02-2012

Re: Static IP not working...

Thanks, Anoush. 👍

John
va1
Newbie
Posts: 4
Thanks: 1
Registered: a month ago

Re: Static IP not working...

Thanks, just did a restart and I can see the IP is the same in the account settings. Cheers!