cancel
Showing results for 
Search instead for 
Did you mean: 

Using a third party router

Montane90
Newbie
Posts: 1
Registered: ‎14-04-2020

Using a third party router

I currently have Plusnet Fibre Unlimited, where the service is fine. Earlier on in the year I experienced awful issues with my modem and decided to switch to BT Hub 6. This has been perfect apart from the range.

 

Currently the RJ66 cable from the socket plugs straight into BT Hub 6. Can I use a new HUAWEI WiFi WS5200 in place of the BT hub or would I have to bridge it?

3 REPLIES 3
dvorak
Moderator
Moderator
Posts: 24,800
Thanks: 4,489
Fixes: 1,139
Registered: ‎11-01-2008

Re: Using a third party router


Moderators Note


This topic has been moved from Fibre to My Router

Customer / Moderator
If it helped click the thumb
If it fixed it click 'This fixed my problem'
Baldrick1
Seasoned Hero
Posts: 6,017
Thanks: 2,659
Fixes: 178
Registered: ‎30-06-2016

Re: Using a third party router

@Montane90 

This is a router only and needs a modem to work. Unfortunately neither Plusnet's hubs or a Smarthub 6 work as a bridge modem. You can pick up a Huawei HG612 quite cheaply from the likes of Ebay. You need Model 3B.

 

bill888
Aspiring Champion
Posts: 1,079
Thanks: 184
Fixes: 32
Registered: ‎18-10-2008

Re: Using a third party router

You have to keep the BT smart hub for broadband connection and as main 'router'.

 

I believe the WS5200 supports normal 'router', 'bridge', and 'repeater' modes.

 

You can probably put the WS5200 is put it into 'bridge' (dumb access point) mode and wire it to the BT smart hub, so the WS5200 can serve wifi.   If WS5200 is in same location as smart hub, then you will probably wish to disable the wifi on smart hub.