cancel
Showing results for 
Search instead for 
Did you mean: 

Tp link and vpn

brid1965
Dabbler
Posts: 14
Thanks: 1
Registered: ‎11-07-2023

Tp link and vpn

i have a hub 2 set up in bridge mode with a tp link ax55 ...

connection is working as it should ....

i'm have trouble installing a vpn, plusnet provider with purevpn ....

the file uploads fine (wireguard) but i constantly get the address / invalid format error which prevents me completing the setup .....

any ideas guys ?

thx in advance dave

Untitled.jpg

6 REPLIES 6
Mustrum
Community Veteran
Posts: 3,635
Thanks: 1,074
Fixes: 77
Registered: ‎13-08-2015

Re: Tp link and vpn

Have you looked at the TP Link site ? https://www.tp-link.com/uk/support/faq/3135/ 

 

Is your VPN compatable?

Anonymous
Not applicable

Re: Tp link and vpn

What device is that 172.xx.xx.xx  address supposed to point to ?

 

It might be complaining because perhaps it is expecting a public IP address, whereas addresses starting with 172.x.x.x, 192.x.x.x, and 10.x.x.x,  are specifically reserved for internal private networks - and therefore flagged as invalid format ?

 

If you are setting up the tp-link router to be the VPN client for your home network, then I'd assume that you would enter your internet WAN's public IP address (that can be found with https://www.whatismyip.com/ ).

 

brid1965
Dabbler
Posts: 14
Thanks: 1
Registered: ‎11-07-2023

Re: Tp link and vpn

yes, setting up to be client for my home network , tried my public ip address with the same error coming back

Baldrick1
Moderator
Moderator
Posts: 12,246
Thanks: 5,441
Fixes: 428
Registered: ‎30-06-2016

Re: Tp link and vpn

Not fettered by any relevant knowledge, I wonder if it’s expecting the Private Key to be a hexadecimal number rather than an alphanumeric password?

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

Anonymous
Not applicable

Re: Tp link and vpn

Perhaps it might accept your public IP address in URL format ? -  i.e. your Plusnet connection's 'domain name' which might look something like "brid1965.plus.net"

 

You should be able to get your 'domain name' by putting you WAN public IP address in to this - https://mxtoolbox.com/ReverseLookup.aspx 

brid1965
Dabbler
Posts: 14
Thanks: 1
Registered: ‎11-07-2023

Re: Tp link and vpn

well i've just off chat with purevpn and apparently wireguard is not supported by them ,,,,, but it gives you the option to down load it 🤣

go figure that one out Crazy2