cancel
Showing results for 
Search instead for 
Did you mean: 

Hub Two - upgrading from Broadband to Fibre

cpw_19
Newbie
Posts: 1
Registered: ‎06-11-2022

Hub Two - upgrading from Broadband to Fibre

Hi,
I'm upgrading from standard (copper) broadband to fibre (FTTC). My fibre service is due to go active as of late next week. Do I need to wait until activation to plug in my new Hub Two (my current router is a Hub Zero) or can I plug it in immediately?
2 REPLIES 2
jab1
Legend
Posts: 17,095
Thanks: 5,482
Fixes: 255
Registered: ‎24-02-2012

Re: Hub Two - upgrading from Broadband to Fibre

The Hub2 will work on ADSL/FTTC/FTTP, so you can plug it in now.

John
Baldrick1
Moderator
Moderator
Posts: 11,706
Thanks: 5,204
Fixes: 418
Registered: ‎30-06-2016

Re: Hub Two - upgrading from Broadband to Fibre

@cpw_19  Welcome to the Community forum.

If you plug it in now it will work on ADSL

 On the changeover day if it doesn’t switch over automatically just factory reset it by pushing a paperclip or similar in the reset hole. Keep the switch closed until you get a green light.

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'