cancel
Showing results for 
Search instead for 
Did you mean: 

Hub One log limits

Community Veteran
Posts: 1,585
Thanks: 59
Fixes: 2
Registered: 17-06-2007

Hub One log limits

All the logs on my Hub One are showing things like:

12:24:14, 07 Apr. (2049952.650000) CWMP: Initializing transaction for event code 2 PERIODIC
06:44:47, 07 Apr. (2029585.200000) CWMP: session closed due to error: Could not resolve host
06:44:47, 07 Apr. (2029585.150000) CWMP: Server URL: https://ceased.tr69.p; Connecting as user: ACS username
06:44:46, 07 Apr. (2029585.140000) CWMP: Session start now. Event code(s): '0 BOOTSTRAP,2 PERIODIC,4 VALUE CHANGE'
12:24:13, 06 Apr. (1963552.650000) CWMP: Initializing transaction for event code 2 PERIODIC
06:44:45, 06 Apr. (1943184.870000) CWMP: session closed due to error: Could not resolve host
06:44:44, 06 Apr. <<<<<<<<<<<<<<<<<<<< Limit of tr069 log >>>>>>>>>>>>>>>>>>>>
06:44:44, 06 Apr. (1943184.000000) CWMP: Server URL: https://ceased.tr69.p; Connecting as user: ACS username
06:44:44, 06 Apr. (1943183.990000) CWMP: Session start now. Event code(s): '0 BOOTSTRAP,2 PERIODIC,4 VALUE CHANGE'
12:24:14, 05 Apr. (1877153.650000) CWMP: Initializing transaction for event code 2 PERIODIC

 

Does this mean the logs are full? If so how can I clear them?

4 REPLIES
Community Gaffer
Community Gaffer
Posts: 12,861
Thanks: 677
Fixes: 64
Registered: 04-04-2007

Re: Hub One log limits

I suspect some buffer is at it's limit, doubt it's anything to be concerned about though.

Interestingly you have tr069 events both before and after that log entry (anything prefixed CWMP is tr069-related).

I suspect the only way you can clear the logs is to factory reset the device. I can give it a go for you if you like though? (clearing the log, not factory resetting the device)

Bob Pullen
Plusnet Products Team
If I've been helpful then please give thanks ⤵

Community Veteran
Posts: 1,585
Thanks: 59
Fixes: 2
Registered: 17-06-2007

Re: Hub One log limits

It would be good to know if there is someway to clear the logs. I've not checked them in the past couple of days so I've no idea what is going on.

 

 

Community Gaffer
Community Gaffer
Posts: 12,861
Thanks: 677
Fixes: 64
Registered: 04-04-2007

Re: Hub One log limits

In fact, I should have spotted this before:

06:44:47, 07 Apr.	(2029585.150000) CWMP: Server URL: https://ceased.tr69.p; Connecting as user: ACS username

The unit has been 'ceased' therefore I'm no longer able to communicate with it. The only way to bring it back would involve a factory reset (which will purge the logs anyway).

Bob Pullen
Plusnet Products Team
If I've been helpful then please give thanks ⤵

Community Veteran
Posts: 1,585
Thanks: 59
Fixes: 2
Registered: 17-06-2007

Re: Hub One log limits

So what does that ceased mean?

 

I'd rather not do a factory reset.. I can't believe that is the only way to clear the logs...

But it does look like that message is rather misleading as the logs still seem to be working

12:24:14, 12 Apr. (2481949.650000) CWMP: Initializing transaction for event code 2 PERIODIC
06:44:51, 12 Apr. (2461586.820000) CWMP: session closed due to error: Could not resolve host
06:44:51, 12 Apr. (2461586.770000) CWMP: Server URL: https://ceased.tr69.p; Connecting as user: ACS username
06:44:51, 12 Apr. (2461586.770000) CWMP: Session start now. Event code(s): '0 BOOTSTRAP,2 PERIODIC,4 VALUE CHANGE'
12:24:14, 11 Apr. (2395550.650000) CWMP: Initializing transaction for event code 2 PERIODIC
06:44:50, 11 Apr. (2375186.500000) CWMP: session closed due to error: Could not resolve host

 

So that just leaves what is meant by ceased