cancel
Showing results for 
Search instead for 
Did you mean: 

Hub 2 Eero mesh wifi and Hive Hub Problems

ian4299
Newbie
Posts: 3
Registered: ‎05-01-2024

Hub 2 Eero mesh wifi and Hive Hub Problems

After signing up for 1 gig download with Plusnet and being sent as a new customer a refurbished Hub 2 !  Very very slow download speeds ie 12 Mbps !!!   Plusnet said it was a line fault ! Openreach tier 1 and teir 2 help could not find the problem ! (did you know teir 3 is to pray to the Lord )  Plusnet sent me a new router. This worked well but my attached Eero mesh wifi was delivering slow speeds ie 110Mbps down. After 2 hours on the phone to Eero support I was asked to play detective and scan the house for high signals , then move my eero mesh extender to the high spots. This helped with the wifi speed.

       But eero told me to turn off the wifi from the Plusnet home hub and disconnect all cat 5 connections from the Hub 2 as well.

connecting a powered switch for my other cat 5 devices.  Oh dear !!!!!!!! the Hive Hub does not connect when attached through a switch !   We had a very cold night with no Heating.   On phoning the Hive helpline and 2 hours of rubbish instructions Hive cut me off !!

     Plug the hive hub directly into the Pusnet Hub 2 and bingo we had control of our Heating.

  I hope this little tale will help someone and prevent a cold night.

    Cheers    

9 REPLIES 9
Baldrick1
Moderator
Moderator
Posts: 12,378
Thanks: 5,559
Fixes: 430
Registered: ‎30-06-2016

Re: Hub 2 Eero mesh wifi and Hive Hub Problems

Moderator's note:
Thread moved from Full Fibre to My Router.

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

MisterW
Superuser
Superuser
Posts: 16,226
Thanks: 6,205
Fixes: 447
Registered: ‎30-07-2007

Re: Hub 2 Eero mesh wifi and Hive Hub Problems

@ian4299 did you know teir 3 is to pray to the Lord

No, but it wouldnt surprise me🤣 Having seen what hoops an OR engineer had to jump through to get to Tier 2, I hate to think what was necessary for Tier 3😀

I was asked to play detective and scan the house for high signals , then move my eero mesh extender to the high spots.

Been there with helping a neighbour, the Eero automatically scans and changes its wifi channels to (attempt) to reduce interference from adjacent networks and there's no way to disable it and set channels manually. Problem is that if a device is in a different area of the house, its interference from others could be significantly different to what the Eero sees, so the Eero selected channel may not be the best.

But eero told me to turn off the wifi from the Plusnet home hub and disconnect all cat 5 connections from the Hub 2 as well.

Turning off the Hub wifi is a good idea, but disconnecting wired connections is rubbish!

Oh dear !!!!!!!! the Hive Hub does not connect when attached through a switch ! 

That's a bit strange, I can only guess that the Hive couldn't negotiate a compatible link speed with the switch, can't see why though?

 

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

dvorak
Moderator
Moderator
Posts: 29,721
Thanks: 6,593
Fixes: 1,485
Registered: ‎11-01-2008

Re: Hub 2 Eero mesh wifi and Hive Hub Problems

Why is the Eero plugged into the Hub2? It should be directly connected to the ONT for it to work in the best way.
Customer / Moderator
If it helped click the thumb
If it fixed it click 'This fixed my problem'
ian4299
Newbie
Posts: 3
Registered: ‎05-01-2024

Re: Hub 2 Eero mesh wifi and Hive Hub Problems

Help me please ,What is an ONT ?

jab1
Legend
Posts: 19,122
Thanks: 6,275
Fixes: 288
Registered: ‎24-02-2012

Re: Hub 2 Eero mesh wifi and Hive Hub Problems

,What is an ONT ?

Optical Network Termination - the box that your Hub plugs into instead of your Master Socket when you are on Full Fibre.

John
greygit1
Aspiring Pro
Posts: 411
Thanks: 56
Fixes: 1
Registered: ‎26-06-2023

Re: Hub 2 Eero mesh wifi and Hive Hub Problems

The "T" is also termed as ...

 

Terminal

Terminator.

 

And it's a modem.

ian4299
Newbie
Posts: 3
Registered: ‎05-01-2024

Re: Hub 2 Eero mesh wifi and Hive Hub Problems

If I plug the eero directly into the ONT . I have no control of the settings for my internet connection. Plusnet help say they can not help me through lack of Knowledge !!!!!!!

      A technical expert will contact me !    Watch this space.

dvorak
Moderator
Moderator
Posts: 29,721
Thanks: 6,593
Fixes: 1,485
Registered: ‎11-01-2008

Re: Hub 2 Eero mesh wifi and Hive Hub Problems

What settings do can't you control with the Eero?
Customer / Moderator
If it helped click the thumb
If it fixed it click 'This fixed my problem'
MisterW
Superuser
Superuser
Posts: 16,226
Thanks: 6,205
Fixes: 447
Registered: ‎30-07-2007

Re: Hub 2 Eero mesh wifi and Hive Hub Problems

@ian4299 to connect your Eero directly to the ONT , you will need to set the Eero to PPPoE with your Plusnet credentials. Instructions for setting Eero to PPPoE are here https://support.eero.com/hc/en-us/articles/5382599417371-PPPoE-Setup-Instructions

The username will be <youraccountname>@plusdsl.net and the password is the one you use to login to the member centre https://www.plus.net/member-centre/login

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.