Is it possible to use a Dreytek Vigor 2766 with my fibre connection and if so are the support team able to advice me of what settings I need to enter into the Dreytek to connect to my service.
Fixed! Go to the fix.
Re: Dreytek Vigor 2766
From my reading you can. The settings are here. https://www.plus.net/help/broadband/broadband-connection-settings/
Plusnet may not help with configuration but there are knowledgeable fellow members of this forum who will help.
Moderator and Customer
If this helped - select the Thumb
If it fixed it, help others - select 'This Fixed My Problem'
@leighcocker it should work just fine.
Set WAN1 to VDSL , PPPoE ( see pages 11 onwards of the QSG )
Where it needs username , use <youraccountname>@plusdsl.net and password is the one you use to access the Plusnet portal (member centre). Set the IP Assignment to Dynamic. That's it for any PlusNet specific settings.