cancel
Showing results for 
Search instead for 
Did you mean: 

Dreytek Vigor 2766

FIXED
leighcocker
Newbie
Posts: 5
Thanks: 2
Registered: ‎08-03-2022

Dreytek Vigor 2766

Is it possible to use a Dreytek Vigor 2766 with my fibre connection and if so are the support team able to advice me of what settings I need to enter into the Dreytek to connect to my service.


Regards


Leigh

5 REPLIES 5
Baldrick1
Moderator
Moderator
Posts: 12,415
Thanks: 5,588
Fixes: 430
Registered: ‎30-06-2016
Moved:

Re: Dreytek Vigor 2766

Baldrick1
Moderator
Moderator
Posts: 12,415
Thanks: 5,588
Fixes: 430
Registered: ‎30-06-2016

Re: Dreytek Vigor 2766

@leighcocker 

From my reading you can. The settings are here. https://www.plus.net/help/broadband/broadband-connection-settings/
Plusnet may not help with configuration but there are knowledgeable fellow members of this forum who will help.

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

MisterW
Superuser
Superuser
Posts: 16,298
Thanks: 6,248
Fixes: 447
Registered: ‎30-07-2007

Re: Dreytek Vigor 2766

Fix

@leighcocker  it should work just fine.

Set WAN1 to VDSL , PPPoE ( see pages 11 onwards of the QSG )

Where it needs username , use <youraccountname>@plusdsl.net and password is the one you use to access the Plusnet portal (member centre). Set the IP Assignment to Dynamic. That's it for any PlusNet specific settings.

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

leighcocker
Newbie
Posts: 5
Thanks: 2
Registered: ‎08-03-2022

Re: Dreytek Vigor 2766

Thanks all, Wil give it a go and hopefully can get connected

leighcocker
Newbie
Posts: 5
Thanks: 2
Registered: ‎08-03-2022

Re: Dreytek Vigor 2766

All sorted after a quick call for support for a password reset, thanks guys.