cancel
Showing results for 
Search instead for 
Did you mean: 

FTTP connection

Eggs
Rising Star
Posts: 106
Thanks: 21
Registered: ‎30-07-2015

FTTP connection

I believe there are two kinds of connection used with FTTP.

CBT or Connectorised Block Terminal Fibre and Legacy Fibre.

I believe CBT has a 20% failure rate with the Legacy Fibre much more reliable.

How do I know which connection I have? I am assuming the former.

 

14 REPLIES 14
bobpullen
Community Gaffer
Community Gaffer
Posts: 16,926
Thanks: 5,012
Fixes: 317
Registered: ‎04-04-2007

Re: FTTP connection


@Eggs wrote:

I believe CBT has a 20% failure rate with the Legacy Fibre much more reliable.


Not sure where you're getting this information from but I question its authneticity. The current methods for FTTP installation will favour efficiency and reliability; it would make little practical sense for the failure rate to be so high.

Bob Pullen
Plusnet Product Team
If I've been helpful then please give thanks ⤵

jab1
Legend
Posts: 18,958
Thanks: 6,214
Fixes: 286
Registered: ‎24-02-2012

Re: FTTP connection

I'd be interested to know your source, too, @Eggs . A quick Google doesn't throw up any useful responses.

John
bmc
Hero
Posts: 3,851
Thanks: 1,363
Fixes: 60
Registered: ‎28-02-2017

Re: FTTP connection

@Eggs 

If you're fed by an overhead pole look at the pole to see if it's got a CBT hanging from it. You won't know if the feed is underground unless you see the chamber open.

 

If your FTTP (network) was installed in the past 3 or 4 years it's probably CBT.

 

Brian

zpeterk
Grafter
Posts: 447
Thanks: 9
Registered: ‎14-04-2007

Re: FTTP connection

Around my way on the poles  OR are using CBTs and the alnets are using AFN (Aerial Fibre nodes) and ASN (Aerial subscriber nodes)

Baldrick1
Moderator
Moderator
Posts: 12,333
Thanks: 5,526
Fixes: 429
Registered: ‎30-06-2016

Re: FTTP connection


@Eggs 

I believe CBT has a 20% failure rate with the Legacy Fibre much more reliable.


‘20% failure rate’ is a meaningless statistic.

What sort of failure? Is it referring to the loss of a working service? Or, is it the number of times that the installation technician has to re-terminate an optical connection, which is corrected at the time, etc.?

And then what is the times scale? Is that 20% per day, or per year or per lifetime of the service etc.?

To quote W S Churchill: “Statistics are like a drunk with a lamp post, used more for support than illumination”.

 

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

jab1
Legend
Posts: 18,958
Thanks: 6,214
Fixes: 286
Registered: ‎24-02-2012

Re: FTTP connection

@bmc , @Baldrick1  I doubt we'll get a response - the OP is a bit of a irregular visitor.😉

John
Eggs
Rising Star
Posts: 106
Thanks: 21
Registered: ‎30-07-2015

Re: FTTP connection

pjmarsh
Superuser
Superuser
Posts: 4,153
Thanks: 1,680
Fixes: 23
Registered: ‎06-04-2007

Re: FTTP connection

That looks to be a BT users opinion from nearly 5 years ago, from probably the fairly early days of CBTs being introduced.  There doesn't seem to be anything to back up that on there either.

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

jab1
Legend
Posts: 18,958
Thanks: 6,214
Fixes: 286
Registered: ‎24-02-2012

Re: FTTP connection

@Eggs That topic is nearly five years old. When was your Fibre connection enabled, and how are you connected - underground or O/H cable?

John
RealAleMadrid
Aspiring Hero
Posts: 2,827
Thanks: 1,473
Fixes: 61
Registered: ‎07-07-2009

Re: FTTP connection

@Eggs So your 20% failure rate figure is a statement from a post years ago on the BT community forum by a "Recognised Expert" .. must be correct then? I don't think so.🙄

Eggs
Rising Star
Posts: 106
Thanks: 21
Registered: ‎30-07-2015

Re: FTTP connection

My connection is via an overhead cable installed last year.

jab1
Legend
Posts: 18,958
Thanks: 6,214
Fixes: 286
Registered: ‎24-02-2012

Re: FTTP connection

So, you will be connected via a CBT, and as has been pointed out, that topic is from 5 years ago, when FTTP was in its infancy.

There have been gigantic leaps in technology since then.

John
Baldrick1
Moderator
Moderator
Posts: 12,333
Thanks: 5,526
Fixes: 429
Registered: ‎30-06-2016

Re: FTTP connection


@Eggs wrote:

https://community.bt.com/t5/Archive-Staging/No-Fibre-Connection-PON-light-Flahing/td-p/1826860


This infers that this post is referring to early life failures made in the early days of fibre installations with inexperienced installers. 
This is very unlikely to bear any relevance 5 years down the line. This forum is certainly not indicating that there are any significant reliability issues.

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

jab1
Legend
Posts: 18,958
Thanks: 6,214
Fixes: 286
Registered: ‎24-02-2012

Re: FTTP connection

Exactly, @Baldrick1  😀

John