Hi @jb68,
I'm afraid that we can't provide broadband usage data any more. I can see you've opened another thread asking for a GEA Test to be run on your line, so I've done so and posted the results below.
| GEA Test Detail |
| Circuit ID |
NA |
Service ID |
|
| |
| |
| Test Outcome |
Pass |
| Test Outcome Code |
GTC_FTTC_SERVICE_0000 |
| Description |
GEA service test completed and no fault found . |
| Main Fault Location |
OK |
| Sync Status |
In Sync |
| Downstream Speed |
79.9 Mbps |
| Upstream Speed |
20.0 Mbps |
| Appointment Required |
N |
| Fault Report Advised |
N |
| NTE Power Status |
PowerOn |
| Voice Line Test Result |
Pass |
| Bridge Tap |
Not Detected |
| Radio Frequency Ingress |
Not Detected |
| Repetitive Electrical Impulse Noise |
Not Detected |
| Cross Talk |
Not Detected |
| Estimated Line Length In Metres |
334.3 |
| Upstream Rate Assessment |
Very Good |
| Downstream Rate Assessment |
Very Good |
| Interference Pattern |
Not Detected |
| Service Impact |
No Impact Observed |
| Home Wiring Problem |
Not Detected |
| Downstream Policing Discard Rate |
0.0 |
| Customer Traffic Level |
Upstream and Downstream traffic detected |
| Technology |
VDSL |
| Current 15Min Bin Retrains |
0 |
| Last 15Min Bin Retrains |
0 |
| DP Type |
External |
| Profile Name |
0.128M-80M Downstream 3dB, Retransmission Low - 0.128M-20M Upstream, Error Protection Off |
| Time Stamp |
2020-02-18T15:45:00 |
| Parameters |
MIN |
MAX |
AVG |
| Down Stream Line Rate |
79.9 Mbps |
79.9 Mbps |
79.9 Mbps |
| Up Stream Line Rate |
19.9 Mbps |
19.9 Mbps |
19.9 Mbps |
| Up Time |
2.0 Sec |
900.0 Sec |
892.0 Sec |
| Retrains |
0.0 |
0.0 |
0.0 |
| Current and Last 15 Minute Bin Performance |
| Parameters |
Last Traffic Count(Upto 15 mins) |
Current Traffic Count(Upto 15 mins) |
| Start Time Stamp |
2020-03-02T15:11:50Z |
2020-03-02T15:26:50Z |
| Ingress Code Violation |
1 |
0 |
| Egress Code Violation |
0 |
0 |
| Errored Seconds |
0 |
0 |
| Severely Errored Seconds |
0 |
0 |
| Unavailable Seconds |
0 |
0 |
If this post resolved your issue please click the 'This fixed my problem' button
