cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Packet Loss / High latency in evenings

RealAleMadrid
Aspiring Hero
Posts: 2,995
Thanks: 1,607
Fixes: 62
Registered: ‎07-07-2009

Re: Packet Loss / High latency in evenings

‎06-09-2023 3:26 PM

@smyth1492  The HUB2 can be set to bridge mode and used as a modem and connected to a router or mesh system that can provide a PPPoE wan connection. Your user credentials would be entered in the router.

I don't use ISP supplied routers so can't help you with the HUB2 setup but there should be info in the router forum board.

Message 16 of 18
(687 Views)
0 Thanks
Dan_the_Van
Superuser
Superuser
Posts: 3,739
Thanks: 2,039
Fixes: 106
Registered: ‎25-06-2007

Re: Packet Loss / High latency in evenings

‎06-09-2023 3:47 PM

@smyth1492 

To change the Hub two to bridge mode (as a modem)

http://192.168.1.254 Advanced Setting > Broadband >Internet > Bridging >Enabled. Save settings

The Hub will reboot and the led will go pink.

Use any LAN port to connect to WAN of router.

HTH

Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.

Message 17 of 18
(676 Views)
0 Thanks
smyth1492
Hooked
Posts: 6
Registered: ‎06-09-2023

Re: Packet Loss / High latency in evenings

‎06-09-2023 3:50 PM

It looks like my Orbi supports the PPPoE so I should be able to make this change. I just need to come up with a plan for the devices that have a ethernet connection as I don't currently have enough ports available. I might try the change without sorting the ethernet ports out to see if this solves the performance issue or not.

Message 18 of 18
(672 Views)
0 Thanks