Question about my line stats.

[#1]

Ok jo,everythings done,ready for the reset.

[#2]

Hi anything but,
I've done that now, I'll check it in a bit and see if it's taken effect.
Jojo

[#3]

Cheers Jo, out in the cold at work atm so I'll check my end tonight.

[#4]

Hi anything but,
your sync is now 4064 with a profile of 3500 so I've changed that at our end. I think that's better but a different router/filter/test socket would probably be the only way to improve on that (or make it worse!)
Jojo

[#5]

Cheers Jo, what's the NM like? I can tweak it a bit with the DG834GT to get my 4mb profile back anyway.

[#6]

nm is rock solid at 6dB

[#7]

Another update...
Seems i have a annoying intermittent line problem still,tried 2 routers (in the process of having one of the PN ones sent to me to try out) managed to catch it yesterday tho.....short burst of line noise,fluctuating NM,then a line drop and resyncs with a slightly reduced line sync/raised NM but with a upload speed of 96kbps.
Been watching the line stats like a hawk and so far on this router (old single port speedtouch) stats are ...
Link Information

Uptime: 0 days, 20:01:00
DSL Type: G.992.1 annex A
Bandwidth (Up/Down) [kbps/kbps]: 448 / 4,224
Data Transferred (Sent/Received) [kB/kB]: 0.00 / 0.00
Output Power (Up/Down) [dBm]: 11.5 / 19.0
Line Attenuation (Up/Down) [dB]: 30.0 / 48.0
SN Margin (Up/Down) [dB]: 19.0 / 6.5
Vendor ID (Local/Remote): TMMB / ALCB
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 1,114,025
CRC Errors (Up/Down): 0 / 29
HEC Errors (Up/Down): 0 / 28
PN`s router should be here today or tomorrow,don`t think it`ll highlight anything i`ve already not found tho,but at least it`ll eliminate any equipment faults before the broadband engineer is booked.

[#8]

Hi anything but
Let us know how you get on with the new router. Are you still in the test socket by the way?
Jojo

[#9]

Yup,still in the test socket.
Here`s the graphs from when it dropped yesterday around 1pm,did log the fault on the phone,think it was simon i spoke to,v helpfull.give him a beer on me
The 2nd dip in the graphs is when i reset the router at 13:15.

[#10]

HI anything but,
I've made Simon aware of your thanks. Where am I getting the beer from, by the way?
Jojo

[#11]

I`ll send one back with the PN router when i`m done with it.
just had a jump in FEC/CRC/HEC upload errors a moment ago.
FEC Errors (Up/Down): 159 / 1,114,237
CRC Errors (Up/Down): 159 / 30
HEC Errors (Up/Down): 124 / 29
What would be considered a high ammount to take note of in FEC/CRC/HEC errors  jo?

[#12]

Indeed something from PN to indicate what is a normal or acceptable range for those values would be very interesting to know.
Many routers will give this information for the 'last 15mins' and 'last 24hrs' which helps people see intermittant issues.

[#13]

PN`s router turned up!
Owe simon 2 beers now.
Stats with the old single port speedtouch....
Link Information

Uptime: 1 day, 1:48:47
DSL Type: G.992.1 annex A
Bandwidth (Up/Down) [kbps/kbps]: 448 / 4,224
Data Transferred (Sent/Received) [kB/kB]: 0.00 / 0.00
Output Power (Up/Down) [dBm]: 11.5 / 19.0
Line Attenuation (Up/Down) [dB]: 30.0 / 48.0
SN Margin (Up/Down) [dB]: 19.0 / 6.0
Vendor ID (Local/Remote): TMMB / ALCB
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 174 / 1,115,584
CRC Errors (Up/Down): 174 / 30
HEC Errors (Up/Down): 125 / 29
Back in a bit to update with the new routers stats.

[#14]

And now with PN`s router connected.....
Link Information

Uptime: 0 days, 0:01:56
DSL Type: G.992.1 annex A
Channel mode: Interleave
Maximum Bandwidth (Up/Down) [kbps/kbps]: 880 / 4,576
Bandwidth (Up/Down) [kbps/kbps]: 448 / 4,384
Data Transferred (Sent/Received) [kB/kB]: 0.00 / 7.00
Output Power (Up/Down) [dBm]: 11.5 / 19.5
Line Attenuation (Up/Down) [dB]: 29.0 / 48.0
SN Margin (Up/Down) [dB]: 20.0 / 7.0
Vendor ID (Local/Remote): TMMB / ALCB
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 0 / 1
CRC Errors (Up/Down): 5 / 1
HEC Errors (Up/Down): 0 / 0

[#15]

Stats from the PN router with just over 2 days uptime...

Uptime: 2 days, 3:40:26
DSL Type: G.992.1 annex A
Channel mode: Interleave
Maximum Bandwidth (Up/Down) [kbps/kbps]: 884 / 4,608
Bandwidth (Up/Down) [kbps/kbps]: 448 / 4,384
Data Transferred (Sent/Received) [kB/GB]: 0.00 / 6.41
Output Power (Up/Down) [dBm]: 11.5 / 19.5
Line Attenuation (Up/Down) [dB]: 29.0 / 48.0
SN Margin (Up/Down) [dB]: 20.0 / 5.5
Vendor ID (Local/Remote): TMMB / ALCB
Loss of Framing (Local/Remote): 0 / 0
Loss of Signal (Local/Remote): 0 / 0
Loss of Power (Local/Remote): 0 / 0
Loss of Link (Remote): 0
Error Seconds (Local/Remote): 0 / 0
FEC Errors (Up/Down): 38 / 258,793
CRC Errors (Up/Down): 9 / 97
HEC Errors (Up/Down): 3 / 730  

Looks like i have a little less (down) FEC errors,a few more CRC errors and quite a few more HEC errors compared to the last router i tried.
Anything to be read into that those with knowledge?