Moan moan adsl2+ is slow

[#1]

So after the upload profile was changed and i got the new phone/wire setup < only i phone line coming from the micro filter my stats are:
Connection Speed 3070 kbps 802 kbps
Line Attenuation 54.5 db 31.3 db
Noise Margin 6.2 db 10.0 db
So can anynoe explain why ive gone from 5mb/s on adsl to 3mb/s on adsl2+, there has to be an error somewhere surely?

[#2]

Does your router report on connection errors at all?
Like you, I'm a little surprised that your speeds aren't higher.

[#3]

Any idea as what your reported attenuation was on vanilla ADSL

[#4]

Quote from: Jameseh

Does your router report on connection errors at all? Like you, I'm a little surprised that your speeds aren't higher.

only just rebooted but this is all i can find:
Port Status TxPkts RxPkts Collisions Tx B/s Rx B/s Up Time
WAN PPPoA 8825 14056    0 1071 9290 00:26:54
LAN 10M/100M 15358 9842    0 9512 1239 00:27:47
WLAN 11M/54M/108M 455 314   0 73          24                00:27:43

Quote from: Oldjim

Any idea as what your reported attenuation was on vanilla ADSL

got pre adsl2+ stats on the other page

[#5]

i think you have this http://community.plus.net/forum/index.php/topic,76302.0.html in my case it cleared its self after a while and my thinking it was part of the training process

[#6]

From the posts you've made of stats it looks like you have a Netgear DG834x router. If that is the case can you download and run RouterStats. On the Telnet Router tab you will find error reporting. We'd also be interested in Bits/Tone which it also shows.
Could a change from fastpath to Interleaved explain some of the speed drop?

[#7]

Not for as much as 2Mbps surely?

[#8]

Absolutely not! But then I did say

Quote from: jelv

Could a change from fastpath to Interleaved explain some of the speed drop?

[#9]

Quote from: jelv

From the posts you've made of stats it looks like you have a Netgear DG834x router. If that is the case can you download and run RouterStats. On the Telnet Router tab you will find error reporting. We'd also be interested in Bits/Tone which it also shows. Could a change from fastpath to Interleaved explain some of the speed drop?

ok have the app running, guess i sholds keep in running all night?  i think i have all the graph boxs ticked in the telnet area, all new to me atm.

[#10]

anotherone posted a gd setup for sample rates ect for routerstats here http://community.plus.net/forum/index.php/topic,76116.0/topicseen.html
its the 15 min intervals of error reporting that will tell the most as you if one 15min interval records very few errors and you end up with a massvive improvment of thought speed in that same period you know youve found the offender

[#11]

Can you post all the information from the Telnet summary page as this has all the error counts and tells us if you are on fastpath or interleaved.

[#12]

downstream rx:
Noise Margin:    6.5  dB
Connection Rate:  3067  Kbps
Line Attenuation: 54.5  dB
Power:            0.0  dBm
Max Rate:        8180  Kbps

SF:              16719
SF Errors:        0
Reed Solomon:    14846770
RS Corrected:    1574
RS Un-Corrected:  0
HEC:              0
Errored Seconds:  0
Severe ES:        0
Interleave Depth: 160
upstream tx:
Noise Margin:    9.3  dB
Connection Rate:  805  Kbps
Line Attenuation: 31.3  dB
Power:            12.9  dBm
Max Rate:        836  Kbps

SF:              15733
SF Errors:        32
Reed Solomon:    113137
RS Corrected:    55
RS Un-Corrected:  0
HEC:              9
Errored Seconds:  0
Severe ES:        0
Interleave Depth: 2

totals
Total Up Times (From SF counts):
WAN:  0 day,  00:05:05
LAN:  0 day,  00:49:46

CRC:  0
LOS:  0
LOF:  0
ES :  0

Bytes Transferred (ppp0):
  Tx: 56232 (54.9 KiB)
  Rx: 185041 (180.7 KiB)
  IP address: 87.114.71.215

[#13]

Downstream Interleave Depth of 160 must be a record. 

[#14]

As it's hard for you to check your wiring you could request PN to turn off interleave and then see how stable your connection is. Otherwise you can leave you router on 24/7 without rebooting and see whether the DLM bring the depth down but this may take weeks.

[#15]

Im glad for the help from u guys but im still banging my head against the wall, how should i get in touch with if PN doesnt seem to want to help?