Search the Community
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
240 results
Sorted by:
02-03-2018
6:34 PM
1 Thanks
Hi there.
I recently purchased a Netgear Nighthawk D7000V2 and I found it to be a slightly difficult process to get the router set up and running. Therefore, I thought I would share the process I w...
21-12-2018
12:05 PM
...ettings seem a bit awry as well as you can see in the image, the options to change some of these are either not available or there is only the one option there.
Any opinions appreciated and any D7800...
13-11-2015
10:53 PM
...odem Technicolor TG582n FTTC router Is my fibre link with Plusnet, from the new BT Fibre CAB to the exchange called VDSL? Would the following all in one box work? Netgear Nighthawk AC1900&n...
31-01-2015
11:36 AM
Hi All, well I had a hell of a time to get my Netgear DGND3700v1 working directly with the built in modem. You can tell if you have a V1 as the serial number starts *2KB I could not find any d...
19-04-2016
3:38 PM
...ssues, however the D7800 refuses to hold a session for longer than 30 minutes. i'm running the current firmware v1.0.0.46 and did a factory rest after applying.
Line figures are quoted as the f...
30-04-2015
1:10 PM
Has anyone got any experience with these two, please? NETGEAR D6400-100UKS AC1600 Dual Band 300+1300 Mbps Wireless VDSL/ADSL Billion BiPAC 8800AXL VDSL2(Fibre)/ADSL2+ Dual Band Wireless AC 1300 T...
10-02-2017
10:10 AM
...800NL to a Netgear X4S D7800.
I have no noise on the line, no dropouts, the modem is always left switched on, and my SamKnows white box gives readings that are consistent but somethimes lower t...
- Tags:
- snr
Labels:
Show results in replies (3)
-
...onths when my Billion 8800NL was in use but it does not seem to work with the Netgear X4S D7800. No c...
-
...o be changed but I've just bought my Netgear X4S D7800 which is excellent & I can't afford to w...
-
...n the middle regarding VDSL connection because unlike ADSL connections, they are unable to initiate a...
15-01-2018
2:34 PM
I am trying use a Netgear DM200 modem with a Netgear R6350 (router only) on a Plusnet FTTC VDSL connection. I can get the DM200 working in modem+router mode both with a PC directly attached to the m...
23-08-2017
9:45 AM
1 Thanks
Hi guys,
I hope someone can help me! I've bought a used Netgear D6400 VDSL router and am having real problems getting it to connect to my Plusnet FTTC service.
First of a...
- Tags:
- Netgear
Labels:
26-03-2018
2:10 PM
...Netgear D7800 VDSL router/modem and my line speed dropped to to 58% of what it had been (60 Mbps to 35 Mbps). Plus net support suggested this was due to Netgear routers not being c...