hub one and another router for vpn

[#1]

hi is it possible to add a router to my existing hub one to access vpn server for my network if so which one is best and how is it done or would i need to buy a standalone modem/router to gain this feature?

thanks

[#2]

You could add a raspberry pi that’s connected to the vpn and install something like squid to route your traffic.
I’ve done this and it works fine.

[#3]

hi i have a raspberry pi 2 but no idea how to do it and would it route all traffic threw all pcs and wifi devices?

[#4]

so you don't want it as an additional access point you want to route all traffic from all devices through a VPN?

[#5]

I would go with an rpi 3 minimum which tbh will be good for around 50mbps, other than that I would go for a Netgear D7800  R7800 with custom firmware. you need plenty of grunt when phushing everything through vpn.

[#6]

hi that netgears a bit too pricey for what i would use it for are there any other cheaper models about ?

[#7]

Sorry that was a typo with the router above, R7800 or an R7000 will do the trick.

Why bother messing around with something that just isn't going to do a proper job ?

[#8]

hi so its ok to add another router to the hub one yes ?