Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for
Modem/Router Help.
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Plusnet Community
- :
- Forum
- :
- Other forums
- :
- Tech Help - Software/Hardware etc
- :
- Re: Modem/Router Help.
Modem/Router Help.
19-10-2008 9:33 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Hello,
Before i moved to plusnet i was with talktalk. and was using a modem router they sent out. and wondered if this would work with the plusnet internet?
My plusnet line is activated tomorrow so wanted to find out before then.
link to talktalk modem: http://ecx.images-amazon.com/images/I/31DEGKjk%2BQL._SL500_AA280_.jpg
Will this work and if not can i set it up to work?
Cheers
Before i moved to plusnet i was with talktalk. and was using a modem router they sent out. and wondered if this would work with the plusnet internet?
My plusnet line is activated tomorrow so wanted to find out before then.
link to talktalk modem: http://ecx.images-amazon.com/images/I/31DEGKjk%2BQL._SL500_AA280_.jpg
Will this work and if not can i set it up to work?
Cheers
1 REPLY 1
Re: Modem/Router Help.
19-10-2008 9:42 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
It will work, but you'll need to enter your PN user name and pasword into its set up pages.
Info on this page for getting into the settings.
I can't remember exactly where in the admin pages the user name and password are stored but you'll need to rake around and find it (IIRC it's under Basic >WAN settings - you'll need to click on the pencil to edit the settings). Once there, just change to your PN details (including the @plusdsl.net bit in the user name) - remember to save the settings! (Click on "Submit" then "Save All")
Edit:
Edited from Kitz's web site here.
Connect the router to your computers Network card using the supplied network cable
~ Browse to http://192.168.1.1
~ Log in using the default settings username = admin and password = admin
~ From the left hand menu select Basic
~ Select WAN settings
~ Click on the pencil icon on the top right hand side
~ Set your username and password as given by Plusnet
which should be in the format of username@plusdsl.net
~ Click Submit
~ Click Save all
~ Click OK
Info on this page for getting into the settings.
I can't remember exactly where in the admin pages the user name and password are stored but you'll need to rake around and find it (IIRC it's under Basic >WAN settings - you'll need to click on the pencil to edit the settings). Once there, just change to your PN details (including the @plusdsl.net bit in the user name) - remember to save the settings! (Click on "Submit" then "Save All")
Edit:
Edited from Kitz's web site here.
Connect the router to your computers Network card using the supplied network cable
~ Browse to http://192.168.1.1
~ Log in using the default settings username = admin and password = admin
~ From the left hand menu select Basic
~ Select WAN settings
~ Click on the pencil icon on the top right hand side
~ Set your username and password as given by Plusnet
which should be in the format of username@plusdsl.net
~ Click Submit
~ Click Save all
~ Click OK
Topic Options
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Plusnet Community
- :
- Forum
- :
- Other forums
- :
- Tech Help - Software/Hardware etc
- :
- Re: Modem/Router Help.