Hub One - Internal IP Address

[#1]

It does not appear possible to alter the Hub One's internal IP address, is this correct or does anyone know a way of achieving it?

[#2]

Just go to Advanced Settings, Home Network, IP Addresses, there are options there.

[#3]

Sorry badly worded question on my part.
What I should have said that I have attempted to change the internal fixed IP address of the Hub One under Advanced Settings, Home Network, IP Addresses.  However when I attempt to do so I get the error message along the lines of "This is not a recognised IP address range".
This also happens on the BT Home Hub 5 on which the Hub One is based.
mav:quote

[#4]

what are you trying to change it to ?

[#5]

Ideally I would like 10.0.0.1
dick:quote

[#6]

Try disabling the DHCP server, edit the DHCP pool and then add the new router IP address (it shouldn't be necessary to delete the existing 192.168.1.254 address).  Remember to re-enable the DHCP server afterwards.
Information gleaned from elsewhere - I don't have a Hub One

[#7]

Hi,
No sadly that does not work either.
Any other ideas?

[#8]

If its anything like the HH5, the first 63 addresses are reserved, presumably for BT WiFi.
Have you tried the start address as 10.0.0.64 - to 10.0.0.253 and the router address as 10.0.0.254 ?

[#9]

Hi Mustrum,
Thanks for that bit of information about the address reservations on the BT HH5, I will give it a try when I next have access to the modem at the client.
That will be when BT have actually repair the line which they appear to have broken...