cancel
Showing results for 
Search instead for 
Did you mean: 

Cisco 837 an NAT/No NAT

Community Veteran
Posts: 1,236
Registered: 02-08-2007

Cisco 837 an NAT/No NAT

I currently use a Cisco 837 and NAT/port forwarding for all my computers and my public webserver. I have 2 usable addresses with PN.
I would like to change this set up so I can use NAT on the first IP address for all the computers but use No NAT on the second IP address and assign that public address to my webserver.
Can anyone point me in the right direction? Is 2 public addresses enough to do this?
If I do this can I still assign a private address to my linux webserver on the same interface for internal connections?