cancel
Showing results for 
Search instead for 
Did you mean: 

Adding static routes to 2704n... Or enable ssh??

dlm2000
Newbie
Posts: 1
Registered: 30-05-2016

Adding static routes to 2704n... Or enable ssh??

Hi 

 

I was just wondering if anyone knows how to add static routes to the plus net 2704n.  Ideally without replacing the firmware.  

An alternative would be to enable telnet/ssh.

Anyone know if away of doing this?

dlm

2 REPLIES
core2lee
Grafter
Posts: 34
Thanks: 8
Registered: 21-04-2016

Re: Adding static routes to 2704n... Or enable ssh??

I know for certain the Telnet/SSH functionality is disabled and by design cannot be re-enabled in the Plusnet firmware. Not really had too many dealings with the 2704n but I know there are some extra config options if you go to 192.168.1.254/expert_user.html 

 

 

Community Veteran
Posts: 19,101
Thanks: 443
Fixes: 21
Registered: 31-08-2007

Re: Adding static routes to 2704n... Or enable ssh??

See also this thread on this board. There are a few other helpful threads around. I'll try and find a few links. Note that the firmware v2 does not allow the config to be downloaded in text format Crazy3