cancel
Showing results for 
Search instead for 
Did you mean: 

TD-W9970 TV SETUP

ste2112701
Newbie
Posts: 2
Registered: 29-06-2017

TD-W9970 TV SETUP

Hi 

just ordered plusnet tv could anyone tell me the setting I need to get this to work with my tp-link w9970

I have Enabled IGMP is there any other setting i need to change on the below image link

 

https://i.imgur.com/M8ShkJI.jpg

 

thanks 

 

 

4 REPLIES
mharvo
Grafter
Posts: 34
Thanks: 3
Registered: 12-03-2017

Re: TD-W9970 TV SETUP

You need to input VLAN ID as 101 as the picture you have posted shows 1 ! 

my Asus DSL-AC88U works this way

and need to connect to LAN Port 3 from router to the youview box

 

ste2112701
Newbie
Posts: 2
Registered: 29-06-2017

Re: TD-W9970 TV SETUP

thanks will give that a go when I recive box probably tomorrow   

dgilbert2
Rising Star
Posts: 73
Thanks: 3
Fixes: 2
Registered: 17-11-2017

Re: TD-W9970 TV SETUP

Did / does this work OK?

dgilbert2
Rising Star
Posts: 73
Thanks: 3
Fixes: 2
Registered: 17-11-2017

Re: TD-W9970 TV SETUP

I can now confirm that the TP-Link TD-W9970 works fine with Plusnet TV subscription channels (wired connection).

 

I have V2 with firmware version:0.9.1 0.2 v0076.0 Build 170919.

 

It just worked with the default settings as they were, no need to change or enable anything under IPTV as that's a different functionality.

 

If anyone has issues just check that "IGMP Proxy" is enabled under Network, WAN settings, PPPoE settings, Advanced (tab at bottom of page).

Also check that "IGMP Snooping" is enabled under Network, LAN settings, DHCP Pool in use (usually the "Default").

 

Smiley