cancel
Showing results for 
Search instead for 
Did you mean: 

Feature Request : Allow firewall exceptions on high

jtankard
Dabbler
Posts: 12
Thanks: 1
Registered: ‎09-05-2014

Feature Request : Allow firewall exceptions on high

Hi Plusnet,
Have been a long time user and very happy with your service. One thing I would love is if we could select inbound ports to allow on your high firewall setting. I run pfsense here and it's a great firewall but I use your firewall too to stop unwanted probes / hack attempts from even hitting pfsense. Unfortunately I do use a couple of inbound ports so I can't use high. Please give this some consideration as I can't be the only one with this requirement.

Thanks John.
2 REPLIES 2
Nibiru
Community Veteran
Posts: 5,665
Thanks: 387
Fixes: 7
Registered: ‎11-08-2007

Re: Feature Request : Allow firewall exceptions on high

I second this feature request.   👍

 

People don't realise just how many unsolicited port probes per second actually occur constantly 24/7.

Looking at pfSense firewall logs, I often see hundreds of blocked attempts per minute over my four WAN addresses.

 

It would be great if the Plusnet firewall was more configurable and able to block the majority of these intrusion attempts ever reaching my VDSL connection.

Plusnet FTTC 80/20 IPv4/30, Hurricane Electric 6in4 IPv6/48, Pulse8 landline & calls, SamKnows 600N
Vigor 130 modem, pfSense 2.5.2 router, DrayTek WAPs, Devolo dLAN 500, Gigaset N300A-IP VoIP DECT
Strat
Moderator
Moderator
Posts: 31,015
Thanks: 3,680
Fixes: 556
Registered: ‎14-04-2007

Re: Feature Request : Allow firewall exceptions on high

Moderators Note
This topic has been moved from Community Site Feedback to Plusnet Feedback.

Customer and Forum Moderator. Windows 10 Firefox 96.0.2 (64-bit)