What's the Max MTU on the Plusnet Hub one (for local network) ?
On my Technicolor TG582n it seems to be 1500 on local network.
Have tried adjusting via Telnet but get:
{admin}=>ip iflist
Interface Group MTU RX TX Admin Oper
1 loop. . . . . . . . . . . . . . local 4096 7636 KB 8422 KB UP [UP]
2 Internet. . . . . . . . . . . . wan 1492 345 MB 98 MB UP UP
3 LocalNetwork. . . . . . . . . . lan 1500 107 MB 349 MB UP [UP]
4 Multicast . . . . . . . . . . . wan 1500 5014 6752 UP UP
{admin}=>ip ifconfig intf=LocalNetwork mtu=9000
MTU too large: maximum allowed MTU for interface LocalNetwork is 1500.
Background:
I've set MTU on PC and NAS to 9,000 and connect them via a gigabit switch. All fine.
But fiddling around with porttrunking on the new NAS I'm running out of space on my 5-port gigabit switch - so I tried connecting my PC via the router (I know will just be 100mbps) however connection is very sketchy. Guessed it might be a MTU issue so went to change it on the router - but no go....
Wondered if upgrading to the Hub One might help.
Not a long term issue - gigabit switch is only full while I migrate from the 2 old NAS to the new one and have them all connected.
