cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 

Port Forwarding

Charlie2
Newbie
Posts: 2
Registered: ‎23-08-2018

Port Forwarding

‎23-08-2018 12:46 PM

Im trying to add a new application (QNAP NAS) and it needs ports UDP500 UDP1701 UDP4500 and UDP1194.

I have added the new application QNAP but I can only add port 500 and 1194 the other 2 ports cant be added as there is a slash of port numbers.  I don't have any other port forwarded.The 2 ports added don't appear to be Open when using https://portchecker.co/check.

Any help would be appreciated

Thanks

 

Message 1 of 3
(689 Views)
0 Thanks
2 REPLIES 2
Anonymous
Not applicable

Re: Port Forwarding

‎23-08-2018 2:34 PM - edited ‎23-08-2018 2:35 PM

@Charlie2 - What is a 'slash of port numbers'?

Edit:- I'm assuming it's 'clash'. If that is the case then you'll have to either change the ports used in the QNAP's config or disable the app that's already using the ports.

Message 2 of 3
(672 Views)
0 Thanks
Charlie2
Newbie
Posts: 2
Registered: ‎23-08-2018

Re: Port Forwarding

‎23-08-2018 3:05 PM

Yes I did mean clash sorry.How do I find what could be using the port numbers that are clashing as I don't have any other port forwarding in use.

 

 

Message 3 of 3
(662 Views)
0 Thanks