cancel
Showing results for 
Search instead for 
Did you mean: 

Draytek Vigor 2862n works with Plusnet / Forec 9VDSL

Highlighted
Dabbler
Posts: 14
Registered: ‎09-03-2013

Re: Draytek Vigor 2862n works with Plusnet / Forec 9VDSL

 

@markhawkin

I'm on 3.9.1_BT.  3.9.1.1_BT is available but nothing in the release notes to improve DSL or WiFi.

I really don't have the time and patience with mess about with it and I'm sorry I wasted so much money on an unreliable combination router.  Wish I'd gone for separate, modem, router and mesh access points.  

Highlighted
Newbie
Posts: 3
Registered: ‎21-12-2016

Re: Draytek Vigor 2862n works with Plusnet / Forec 9VDSL

Online thanks guys

Not getting the full speed on the unlimited fiber connection mind you - one for plus.net to check

Highlighted
Community Veteran
Posts: 5,603
Thanks: 364
Fixes: 6
Registered: ‎11-08-2007

Re: Draytek Vigor 2862n works with Plusnet / Forec 9VDSL

@adutton before trying to get your connection optimised, check what firmware your 2862n has installed, as it probably needs to be updated to version 3.9.1.1_BT downloaded from Draytek support here

Plusnet FTTC 80/20 IPv4/30, Hurricane Electric 6in4 IPv6/48, Pulse8 landline & calls, SamKnows 600N
Vigor 130 modem, pfSense 2.4.5-p1 router, 5 WAPs, Devolo dLAN 500, Gigaset N300A-IP VoIP DECT
Highlighted
Community Veteran
Posts: 5,603
Thanks: 364
Fixes: 6
Registered: ‎11-08-2007

Re: Draytek Vigor 2862n works with Plusnet / Forec 9VDSL

@adutton  how are your 2862n connection stats looking after 24 hours using the 3.9.1.1_BT firmware ?, now that the FTTC DLM has had a chance to optimise your connection with the new modem and latest firmware Huh

Plusnet FTTC 80/20 IPv4/30, Hurricane Electric 6in4 IPv6/48, Pulse8 landline & calls, SamKnows 600N
Vigor 130 modem, pfSense 2.4.5-p1 router, 5 WAPs, Devolo dLAN 500, Gigaset N300A-IP VoIP DECT