cancel
Showing results for 
Search instead for 
Did you mean: 

Move router to use Voip before switchover

FIXED
bmc
Hero
Posts: 3,854
Thanks: 1,363
Fixes: 60
Registered: ‎28-02-2017

Re: Move router to use Voip before switchover

@Baldrick1 

Now you mention it running an ethernet cable down from the loft to a convenient location would work - if it can be done.

 

Given the sow speed of the connection I'd be loath to recommend a wireless link for the phone.

 

Brian

 

Baldrick1
Moderator
Moderator
Posts: 12,339
Thanks: 5,528
Fixes: 429
Registered: ‎30-06-2016

Re: Move router to use Voip before switchover


@bmc wrote:

@Baldrick1 

Given the sow speed of the connection I'd be loath to recommend a wireless link for the phone.


Using an Ethernet cable will not make a jot of difference to the service connection speed. I read that VoIP only needs about 100kbps both up and down.

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'

Wuz
Rising Star
Posts: 148
Thanks: 1
Fixes: 2
Registered: ‎30-07-2007

Re: Move router to use Voip before switchover

Thanks all,

My Plusnet contract runs out next April so I have sometime to try and persuade the better half to start using her mobile and we give up the landline.

Unlikely to be succesful and I will review again after a friend who lives in Bristol goes to a meeting there. I suspect he will give up the landline! He is an electrican so will go with the simpest solution.

Thanks and a thumbs up to all who contributed. I am away for the weekend but will review all this In September.

Cheers to all,

Wuz

 

 

jab1
Legend
Posts: 18,961
Thanks: 6,216
Fixes: 286
Registered: ‎24-02-2012

Re: Move router to use Voip before switchover


@Baldrick1 wrote:

@jab1 wrote:

@Wuz Your router will have to be repositioned, 


Why?

I know that some ISPs provide a hub with a built in ATA but their use is not mandatory. Third party ATAs are stand alone and can be connected using a WiFi bridge such as a simple extender with an Ethernet output. Some ISPs, such a BT/EE will also give a free issue remote wireless ATA on request. These look like a power brick fitted with a phone socket. They are connected wirelessly to the hub via WPS but interestingly continue working with the hub wireless switched off.


Fair enough, @Baldrick1 As I have a ATA in my Fritz!Box, I admit to not having looked deeply into options - I'm always open to education, though.

John