cancel
Showing results for 
Search instead for 
Did you mean: 

negative PSD ????

kiaorak
Newbie
Posts: 2
Registered: ‎25-02-2021

negative PSD ????

My line stats are looking a bit um.. unusual. IS there still an automated way to generate a line check like there used to be?

Actual PSD-4.-5dB-4.-4dB

 

1 REPLY 1
Gandalf
Plusnet Help Team
Plusnet Help Team
Posts: 19,316
Thanks: 6,520
Fixes: 1,076
Registered: ‎21-04-2017

Re: negative PSD ????

I don't believe we've ever offered a way of automatically generating broadband line checks.

I've run a test now though and attached it below:

GEA Test Detail
Circuit ID NA Service ID [redacted BBEU]
 
 
Test Outcome Pass
Test Outcome Code GTC_FTTC_SERVICE_0000
Description GEA service test completed and no fault found .
Main Fault Location OK
Sync Status In Sync
Downstream Speed 68.7 Mbps
Upstream Speed 20.0 Mbps
Appointment Required N
Fault Report Advised N
NTE Power Status PowerOn
Voice Line Test Result Pass
Radio Frequency Ingress Not Detected
Repetitive Electrical Impulse Noise Not Detected
Cross Talk Not Detected
Estimated Line Length In Metres 186.2
Upstream Rate Assessment Very Good
Downstream Rate Assessment Low
Interference Pattern Not Detected
Service Impact No Impact Observed
Home Wiring Problem Not Detected
Downstream Policing Discard Rate 0.0
Customer Traffic Level Upstream and Downstream traffic detected
Technology VDSL
DP Type External
Profile Name 0.128M-80M Downstream, Error Protection Off - 0.128M-20M Upstream, Error Protection Off
Time Stamp 2021-02-13T13:00:00
Parameters MIN MAX AVG
Down Stream Line Rate 68.7 Mbps 68.8 Mbps 68.8 Mbps
Up Stream Line Rate 20.0 Mbps 20.0 Mbps 20.0 Mbps
Up Time 835.0 Sec 900.0 Sec 899.9 Sec
Retrains 0.0 1.0 0.0
Current and Last 15 Minute Bin Performance
Parameters Last Traffic Count(Upto 15 mins) Current Traffic Count(Upto 15 mins)
Start Time Stamp 2021-02-26T12:31:22.176+00:00 2021-02-26T12:46:22.176+00:00
Ingress Code Violation 0 1
Egress Code Violation 0 1
Errored Seconds 0 1
Severely Errored Seconds 0 0
Unavailable Seconds 0 0

All looks OK to me.

If this post resolved your issue please click the 'This fixed my problem' button
 Anoush Mortazavi
 Plusnet Help Team