I don't believe we've ever offered a way of automatically generating broadband line checks.
I've run a test now though and attached it below:
| GEA Test Detail |
| Circuit ID |
NA |
Service ID |
[redacted BBEU] |
| |
| |
| Test Outcome |
Pass |
| Test Outcome Code |
GTC_FTTC_SERVICE_0000 |
| Description |
GEA service test completed and no fault found . |
| Main Fault Location |
OK |
| Sync Status |
In Sync |
| Downstream Speed |
68.7 Mbps |
| Upstream Speed |
20.0 Mbps |
| Appointment Required |
N |
| Fault Report Advised |
N |
| NTE Power Status |
PowerOn |
| Voice Line Test Result |
Pass |
| Radio Frequency Ingress |
Not Detected |
| Repetitive Electrical Impulse Noise |
Not Detected |
| Cross Talk |
Not Detected |
| Estimated Line Length In Metres |
186.2 |
| Upstream Rate Assessment |
Very Good |
| Downstream Rate Assessment |
Low |
| Interference Pattern |
Not Detected |
| Service Impact |
No Impact Observed |
| Home Wiring Problem |
Not Detected |
| Downstream Policing Discard Rate |
0.0 |
| Customer Traffic Level |
Upstream and Downstream traffic detected |
| Technology |
VDSL |
| DP Type |
External |
| Profile Name |
0.128M-80M Downstream, Error Protection Off - 0.128M-20M Upstream, Error Protection Off |
| Time Stamp |
2021-02-13T13:00:00 |
| Parameters |
MIN |
MAX |
AVG |
| Down Stream Line Rate |
68.7 Mbps |
68.8 Mbps |
68.8 Mbps |
| Up Stream Line Rate |
20.0 Mbps |
20.0 Mbps |
20.0 Mbps |
| Up Time |
835.0 Sec |
900.0 Sec |
899.9 Sec |
| Retrains |
0.0 |
1.0 |
0.0 |
| Current and Last 15 Minute Bin Performance |
| Parameters |
Last Traffic Count(Upto 15 mins) |
Current Traffic Count(Upto 15 mins) |
| Start Time Stamp |
2021-02-26T12:31:22.176+00:00 |
2021-02-26T12:46:22.176+00:00 |
| Ingress Code Violation |
0 |
1 |
| Egress Code Violation |
0 |
1 |
| Errored Seconds |
0 |
1 |
| Severely Errored Seconds |
0 |
0 |
| Unavailable Seconds |
0 |
0 |
All looks OK to me.
From 31st October 2022, I no longer have a regular presence here as I’ve moved on to a new role.
