Plusnet profile update?
FIXED- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Plusnet Community
- :
- Forum
- :
- Help with my Plusnet services
- :
- Fibre Broadband
- :
- Re: Plusnet profile update?
Re: Plusnet profile update?
05-11-2016 2:35 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
would you suggest I reboot router after disconnecting the sky box and again after the alarm to see if either of them are interferring with signal
Re: Plusnet profile update?
05-11-2016 2:37 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
That's improved the downstream somewhat and it's now much closer to the low range of the estimate. The upstream still has a major issue though, the noise margin is much too high indicating that the DSLAM has increased it to cope with noise. I'd still go ahead and disconnect the sky box and alarm and see what happens to the stats.
I don't like the fact that the router rebooted itself though.
Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.
Re: Plusnet profile update?
05-11-2016 2:43 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
would you suggest I reboot router after disconnecting the sky box and again after the alarm to see if either of them are interferring with signal
Probably best not to reboot the router too often for a while now , it might be seen as instability. Lets just see what if anything happens to the noise margins when they're disconnected
Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.
Re: Plusnet profile update?
05-11-2016 3:32 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
sky and alarm connected
1. Product name: |
Plusnet Hub |
2. Serial number: |
+081441+NQ63016178 |
3. Firmware version: |
Software version 4.7.5.1.83.8.226 Last updated 10/10/16 |
4. Board version: |
Plusnet Hub One |
5. DSL uptime: |
0 days, 00:35:24 |
6. Data rate: |
527 / 22465 |
7. Maximum data rate: |
667 / 22187 |
8. Noise margin: |
11.1 / 5.8 |
9. Line attenuation: |
44.9 / 30.0 |
10. Signal attenuation: |
8.0 / 24.6 |
11. Data sent/received: |
685.6 MB / 5.9 GB |
sky disconnected
1. Product name: |
Plusnet Hub |
2. Serial number: |
+081441+NQ63016178 |
3. Firmware version: |
Software version 4.7.5.1.83.8.226 Last updated 10/10/16 |
4. Board version: |
Plusnet Hub One |
5. DSL uptime: |
0 days, 01:02:15 |
6. Data rate: |
527 / 22465 |
7. Maximum data rate: |
677 / 22199 |
8. Noise margin: |
11.4 / 5.8 |
9. Line attenuation: |
44.9 / 30.0 |
10. Signal attenuation: |
8.0 / 24.6 |
11. Data sent/received: |
686.4 MB / 5.9 GB |
alarm and sky disconnected
1. Product name: |
Plusnet Hub |
2. Serial number: |
+081441+NQ63016178 |
3. Firmware version: |
Software version 4.7.5.1.83.8.226 Last updated 10/10/16 |
4. Board version: |
Plusnet Hub One |
5. DSL uptime: |
0 days, 01:07:30 |
6. Data rate: |
527 / 22465 |
7. Maximum data rate: |
670 / 21889 |
8. Noise margin: |
11.1 / 5.7 |
9. Line attenuation: |
44.9 / 30.0 |
10. Signal attenuation: |
8.0 / 24.6 |
11. Data sent/received: |
686.7 MB / 5.9 GB |
Re: Plusnet profile update?
05-11-2016 3:50 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
That's disappointing, no real change so it doesn't look like sky or the alarm are the problem.
Might be best to leave it alone for a day or so to see if the DSLAM will reduce the noise margin on the upstream. Then check again at the test socket, if that's still showing better speeds then a VDSL plate and new CAT5 extension may be the option.
I suppose it's possible that it may actually be the plug connector on the removeable faceplate...
Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.
Re: Plusnet profile update?
05-11-2016 4:14 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
will do. thanks again for all your help and guidance
Re: Plusnet profile update?
05-11-2016 9:54 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Router just did another spontaneous reboot
1. Product name: | Plusnet Hub |
2. Serial number: | +081441+NQ63016178 |
3. Firmware version: | Software version 4.7.5.1.83.8.226 Last updated 10/10/16 |
4. Board version: | Plusnet Hub One |
5. DSL uptime: | 0 days, 00:07:41 |
6. Data rate: | 1995 / 18695 |
7. Maximum data rate: | 2156 / 19017 |
8. Noise margin: | 6.3 / 6.3 |
9. Line attenuation: | 42.3 / 27.8 |
10. Signal attenuation: | 30.7 / 22.4 |
11. Data sent/received: | 875.0 MB / 6.6 GB |
Seem to have lost download speed bu gained upload speed
Also signal attenuation changed
Re: Plusnet profile update?
06-11-2016 10:47 AM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Another spontaneous reboot about 5 am by the looks of things
1. Product name: | Plusnet Hub |
2. Serial number: | +081441+NQ63016178 |
3. Firmware version: | Software version 4.7.5.1.83.8.226 Last updated 10/10/16 |
4. Board version: | Plusnet Hub One |
5. DSL uptime: | 0 days, 05:34:54 |
6. Data rate: | 1995 / 16764 |
7. Maximum data rate: | 2178 / 19594 |
8. Noise margin: | 6.3 / 6.2 |
9. Line attenuation: | 41.9 / 27.8 |
10. Signal attenuation: | 30.5 / 22.5 |
11. Data sent/received: | 1.2 GB / 10.6 GB |
Re: Plusnet profile update?
06-11-2016 10:51 AM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Had 2 further spontaneous reboots from router. Is that plusnet or just the router misbehaving?
Re: Plusnet profile update?
06-11-2016 11:29 AM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Is the router actually rebooting or is it just resynching ? If it's rebooting then it sounds like it's faulty
Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.
Re: Plusnet profile update?
06-11-2016 11:55 AM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
it is disconnecting from internet but still shows the amount of data transferred so you are probably right in saying resyncing. I presume that is normal
Re: Plusnet profile update?
06-11-2016 12:11 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Yes, I hadn't noticed the data transferred wasn't being reset, that confirms it's just resynching. You've obviously still got some line issues. I think perhaps you may have to go with your original plan of new extension wiring to a vdsl filtered faceplate
Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.
Re: Plusnet profile update?
06-11-2016 12:51 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
is it worth waiting for a few days to see if things improve?
Re: Plusnet profile update?
06-11-2016 3:38 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
Fitted vdsl faceplate and ran cable to router. Guess I now have to wait for plusnet to notice and update line speed
1. Product name: | Plusnet Hub |
2. Serial number: | +081441+NQ63016178 |
3. Firmware version: | Software version 4.7.5.1.83.8.226 Last updated 10/10/16 |
4. Board version: | Plusnet Hub One |
5. DSL uptime: | 0 days, 00:02:46 |
6. Data rate: | 2000 / 27141 |
7. Maximum data rate: | 5065 / 31719 |
8. Noise margin: | 12.2 / 6.2 |
9. Line attenuation: | 39.0 / 27.3 |
10. Signal attenuation: | 26.8 / 23.7 |
11. Data sent/received: | 132.4 MB / 436.2 MB |
06-11-2016 4:29 PM - edited 06-11-2016 4:32 PM
- Mark as New
- Bookmark
- Subscribe
- Subscribe to RSS Feed
- Highlight
- Report to Moderator
That's much better, close to the bottom of the estimates but liveable with using an extension I guess. Run the BT speedtest http://speedtest.btwholesale.com/ and after the basic speedtest do the 'further diagnostics' and check what the IP Profile says. If that's much higher than the PN line speed then try the chat to ask for the PN line speed to be changed to match the BT profile or wait for one of the PN help team to spot this thread and hopefully change it
Superusers are not staff, but they do have a direct line of communication into the business in order to raise issues, concerns and feedback from the community.
- Subscribe to RSS Feed
- Mark Topic as New
- Mark Topic as Read
- Float this Topic for Current User
- Bookmark
- Subscribe
- Printer Friendly Page
- Plusnet Community
- :
- Forum
- :
- Help with my Plusnet services
- :
- Fibre Broadband
- :
- Re: Plusnet profile update?