Odd TBB test ?

[#1]

had a couple of good weeks all ok , the today psb-bng04.   similar results over last 3 tests

http://www.thinkbroadband.com/speedtest/results.html?id=149319687012503529513

[#2]

http://www.thinkbroadband.com/speedtest/results.html?id=149319779216063415935

[#3]

gateway psb-bng03. now and still same ?? and slow web page loading

http://www.thinkbroadband.com/speedtest/results.html?id=149320396218302417690

[#4]

Mine has been fine since my last moan.

http://www.thinkbroadband.com/speedtest/button/149321774290847481176.png

As expected!

I have no idea how it came to be fixed other than a day or so previous to my connection working properly, I saw 2 seperate Openreach guys messing with cables etc for a customer a few doors away... they were messing around for quite some time!, I also saw another guy at my cab on the same day.

Just to note my connection never dropped in the period before of after the visit.

Could more capacity have been added ?

[#5]

well after BT outage today i get nice test would like to see this all the time PLEASE

gateway pcn-bng01.

http://www.thinkbroadband.com/speedtest/results.html?id=149322903423124493890

[#6]

---

@rongtw wrote:

had a couple of good weeks all ok , the today psb-bng04.   similar results over last 3 tests

---

So are you saying that your problems went away the same time as me then, a few weeks ago ?

[#7]

Yes @30FTTC06  past few weeks have been ok

it then started playing up   but since outage yesterday its looks ok again , Time will tell

[#8]

@rongtw Hey!

No changes on our side which could cause it.  If you are fault free, then our current theory is that the differences are down to the different routing changes your connection has when it is routed to the different BNGs across the BT Wholesale network.  If you want to help us investigate further,  start a log of which BNGs you are connecting to when you do speed tests.  We'll need both fast and slow.   Don't post them on there until you've got a week or two of data. (We can't do much with individual speed tests, so they'd just be spamming the thread).  

I've another suggestion which I'll PM you about.

[#9]

@Kelly will do from previous post did you see PSB BNG 03 and 04 were bad for me

[#10]

---

@rongtw wrote:

Yes @30FTTC06  past few weeks have been ok

it then started playing up   but since outage yesterday its looks ok again , Time will tell

---

@rongtw

Ok thanks, It seems plusnet are pointing a finger at Openreach then seeing as they are clueless as to what happened!

Also I've been on various BNG gateways the same as you in the past few weeks, and they all seem to be trouble free.

[#11]

bng02 

Whats wrong????

 

[#12]

I see you have posted a Samknows graph with problems starting around April sometime.

Are you sure it's just Multithread tests ?

Try some tests with iperf3

Forward:

iperf3 -c bouygues.testdebit.info -p 5200

Reverse:

iperf3 -c bouygues.testdebit.info -p 5200 -R

[#13]

Results below, looks like an issue?

Connecting to host bouygues.testdebit.info, port 5200
[ 4] local 192.168.1.104 port 58971 connected to 89.84.127.53 port 5200
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 1.00 MBytes 8.39 Mbits/sec
[ 4] 1.00-2.00 sec 2.00 MBytes 16.8 Mbits/sec
[ 4] 2.00-3.00 sec 2.12 MBytes 17.8 Mbits/sec
[ 4] 3.00-4.00 sec 2.25 MBytes 18.9 Mbits/sec
[ 4] 4.00-5.00 sec 2.25 MBytes 18.9 Mbits/sec
[ 4] 5.00-6.00 sec 2.25 MBytes 18.9 Mbits/sec
[ 4] 6.00-7.00 sec 1.25 MBytes 10.5 Mbits/sec
[ 4] 7.00-8.00 sec 2.12 MBytes 17.8 Mbits/sec
[ 4] 8.00-9.00 sec 1.38 MBytes 11.5 Mbits/sec
[ 4] 9.00-10.00 sec 2.12 MBytes 17.8 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-10.00 sec 18.8 MBytes 15.7 Mbits/sec sender
[ 4] 0.00-10.00 sec 18.6 MBytes 15.6 Mbits/sec receiver

iperf Done.

Connecting to host bouygues.testdebit.info, port 5200
Reverse mode, remote host bouygues.testdebit.info is sending
[ 4] local 192.168.1.104 port 59003 connected to 89.84.127.53 port 5200
[ ID] Interval Transfer Bandwidth
[ 4] 0.00-1.00 sec 1.44 MBytes 12.1 Mbits/sec
[ 4] 1.00-2.00 sec 1.37 MBytes 11.5 Mbits/sec
[ 4] 2.00-3.00 sec 1.05 MBytes 8.85 Mbits/sec
[ 4] 3.00-4.00 sec 940 KBytes 7.70 Mbits/sec
[ 4] 4.00-5.00 sec 1.29 MBytes 10.8 Mbits/sec
[ 4] 5.00-6.00 sec 865 KBytes 7.09 Mbits/sec
[ 4] 6.00-7.00 sec 898 KBytes 7.35 Mbits/sec
[ 4] 7.00-8.00 sec 980 KBytes 8.02 Mbits/sec
[ 4] 8.00-9.00 sec 959 KBytes 7.86 Mbits/sec
[ 4] 9.00-10.00 sec 1012 KBytes 8.29 Mbits/sec
- - - - - - - - - - - - - - - - - - - - - - - - -
[ ID] Interval Transfer Bandwidth Retr
[ 4] 0.00-10.00 sec 11.0 MBytes 9.26 Mbits/sec 24 sender
[ 4] 0.00-10.00 sec 10.8 MBytes 9.06 Mbits/sec receiver

iperf Done.

[#14]

So you have a problem with Single and Multithread then, so posting here will just add to confusion.

I expect that all your tests are from a quiet line and with a cable ?

[#15]

Its a 80/20 FTTC line, directly connected to the router with a cable.