We seem to be having connection issues in the house on wifi to the Hub One. My son especially constantly complains about disconnects to the wifi.
We have a Hub One with the following status at the bottom of the config page. Which hasn't changed since we got it about 18 months ago.
Plusnet Hub One | Software version 4.7.5.1.83.8.217 | Last updated Unknown
Technical details below if this helps. Anything I need to be concerned about?
| Product name: |
Plusnet Hub |
| 2. Serial number: |
+081441+NQ52925972 |
| 3. Firmware version: |
Software version 4.7.5.1.83.8.217 Last updated Unknown |
| 4. Board version: |
Plusnet Hub One |
| 5. DSL uptime: |
3 days, 13:30:54 |
| 6. Data rate: |
2000 / 32397 |
| 7. Maximum data rate: |
7401 / 38629 |
| 8. Noise margin: |
15.8 / 6.9 |
| 9. Line attenuation: |
25.9 / 26.0 |
| 10. Signal attenuation: |
25.9 / 23.3 |
| 11. Data sent/received: |
21.1 GB / 42.5 GB |
| 12. Broadband username: |
|
| 13. 2.4 GHz Wireless network/SSID: |
Cuthbert |
| 14. 2.4 GHz Wireless connections: |
Enabled (802.11 b/g/n (up to 300 Mb/s)) |
| 15. 2.4 GHz Wireless security: |
WPA2 |
| 16. 2.4 GHz Wireless channel: |
Automatic (Smart Wireless) |
| 17. 5 GHz Wireless network/SSID: |
Cuthbert |
| 18. 5 GHz Wireless connections: |
Enabled (802.11 a/n/ac (up to 1300 Mb/s)) |
| 19. 5 GHz Wireless security: |
WPA2 |
| 20. 5 GHz Wireless channel: |
Automatic (Smart Wireless) |
| 21. Firewall: |
Default |
| 22. MAC Address: |
a0:1b:29:66:7a:5e |
| 23. Modulation: |
G.993.2 Annex B |
| 24. Software variant: |
AA |
| 25. Boot loader: |
1.0.0 |
Should it not automatically update to newer versions? Is there a way to force a firmware update if it could help with wifi stability?
Thanks in advance.
Moderator's note by Mike (Mav): Post released from Spam Filter.
