GEA test

[#1]

Hi,

Would it be possible to get a GEA Test for my line please?

Thanks

[#2 · Accepted solution]

Thanks for your post @smackay83

I've provided the GEA test below

Test Outcome	Pass
Test Outcome Code	GTC_FTTC_SERVICE_0000
Description	GEA service test completed and no fault found .
Main Fault Location	OK
Sync Status	In Sync
Downstream Speed	72.0 Mbps
Upstream Speed	20.0 Mbps
Appointment Required	N
Fault Report Advised	N
NTE Power Status	PowerOn
Voice Line Test Result	Pass
Bridge Tap	Not Detected
Radio Frequency Ingress	Not Detected
Repetitive Electrical Impulse Noise	Not Detected
Cross Talk	Not Detected
Estimated Line Length In Metres	408.8
Upstream Rate Assessment	Very Good
Downstream Rate Assessment	Very Good
Interference Pattern	Regular Interference Observed Daily
Service Impact	No Impact Observed
Interference Duration Longest Occurrence	;00:00to23:45
Interference Location	Customer Premise
Interference Observed In Days	14
Home Wiring Problem	Not Detected
Technology	VDSL
Current 15Min Bin Retrains	0
Last 15Min Bin Retrains	0
DP Type	External
Profile Name	0.128M-80M Downstream 3dB, Retransmission High - 0.128M-20M Upstream, Error Protection Off
Time Stamp	2019-09-28T21:15:00

Parameters	MIN	MAX	AVG
Down Stream Line Rate	75.8 Mbps	75.8 Mbps	75.8 Mbps
Up Stream Line Rate	20.0 Mbps	20.0 Mbps	20.0 Mbps
Up Time	898.0 Sec	900.0 Sec	899.9 Sec
Retrains	0.0	0.0	0.0

Current and Last 15 Minute Bin Performance
Parameters	Last Traffic Count(Upto 15 mins)	Current Traffic Count(Upto 15 mins)
Start Time Stamp	2019-10-11T19:44:57Z	2019-10-11T19:59:57Z
Ingress Code Violation	2	0
Egress Code Violation	0	0
Errored Seconds	0	0
Severely Errored Seconds	0	0
Unavailable Seconds	0	0

[#3]

Thank you. Is this anything to worry about

Interference Pattern	Regular Interference Observed Daily
Service Impact	No Impact Observed
Interference Duration Longest Occurrence	;00:00to23:45
Interference Location	Customer Premise
Interference Observed In Days	14

Profile Name

0.128M-80M Downstream 3dB, Retransmission High - 0.128M-20M Upstream, Error Protection Off

[#4]

@smackay83,

Everything looks spot on from this side IMO, are you seeing any issues your side that is concerning you?

Thanks.

[#5]

No, I'm happy with my service. Just wondering what is causing the Regular Interference.

[#6]

Hi @smackay83

Thanks for confirming - the line you've highlighted is nothing to be concerned about - it seems to be a staple on most of the line tests we run, irrespective of the quality of the line.

If you run into any issues further down the line, just let me know.

Best wishes

Dave

[#7]

No problem. Thank you.