Showing results for 
Search instead for 
Did you mean: 

GEA line test request

Posts: 52
Registered: ‎23-06-2017

GEA line test request


Could you perform a GEA line test please? I'm interested in the results as I've had a DLM reset done on my line, but I seem to be getting a lot of errored seconds, and wondering if the GEA test might throw something up.


Many thanks

Plusnet Help Team
Plusnet Help Team
Posts: 9,624
Thanks: 3,097
Fixes: 487
Registered: ‎21-04-2017

Re: GEA line test request


Sure thing, here you go.

Test Outcome Pass
Test Outcome Code GTC_FTTC_SERVICE_0003
Description No problem found, OAM test is not currently supported on this line.
Main Fault Location OK
Sync Status In Sync
Downstream Speed 70.4 Mbps
Upstream Speed 20.0 Mbps
Appointment Required N
Fault Report Advised N
NTE Power Status PowerOn
Voice Line Test Result Pass
Bridge Tap Not Detected
Repetitive Electrical Impulse Noise Not Detected
Estimated Line Length In Metres 310.4
Upstream Rate Assessment Very Good
Downstream Rate Assessment Reasonable
Interference Pattern Not Detected
Service Impact No Impact Observed
Home Wiring Problem Not Detected
Downstream Policing Discard Rate 0.0
Customer Traffic Level Upstream and Downstream Traffic Detected
Technology VDSL
Profile Name 0.128M-80M Downstream, Error Protection Off - 0.128M-20M Upstream, Error Protection Off
If this post resolved your issue please click the 'This fixed my problem' button
 Anoush Mortazavi
 Plusnet Help Team
Posts: 52
Registered: ‎23-06-2017

Re: GEA line test request

Many thanks!

Posts: 22
Thanks: 1
Registered: ‎20-09-2012

Re: GEA line test request

Can i grab one too as have had the engineer out yesterday and want to check the fault marker has cleared ok.