FTTC GEA Test

[#1]

Hi, could I have GEA Test please for my line

Thank You

[#2]

Hi @ketleystar,

Here is your GEA test result. Please let us know if there's anything further that you'd like us to look into.

GEA Test Detail
Circuit ID	NA	Service ID	BBEUXXXXXXXX

Test Outcome	Pass
Test Outcome Code	GTC_FTTC_SERVICE_0000
Description	GEA service test completed and no fault found .
Main Fault Location	OK
Sync Status	In Sync
Downstream Speed	63.6 Mbps
Upstream Speed	20.0 Mbps
Appointment Required	N
Fault Report Advised	N
NTE Power Status	PowerOn
Voice Line Test Result	Pass
Bridge Tap	Not Detected
Radio Frequency Ingress	Not Detected
Repetitive Electrical Impulse Noise	Not Detected
Cross Talk	Not Detected
Estimated Line Length In Metres	391.6
Upstream Rate Assessment	Very Good
Downstream Rate Assessment	Reasonable
Interference Pattern	Not Detected
Service Impact	No Impact Observed
Home Wiring Problem	Not Detected
Downstream Policing Discard Rate	0.0
Customer Traffic Level	Upstream and Downstream Traffic Detected
Technology	VDSL
DP Type	External
Profile Name	0.128M-80M Downstream, Interleaving Low - 0.128M-20M Upstream, Error Protection Off
Time Stamp	2020-01-24T14:30:00

Parameters	MIN	MAX	AVG
Down Stream Line Rate	56.5 Mbps	63.6 Mbps	60.1 Mbps
Up Stream Line Rate	20.0 Mbps	20.0 Mbps	20.0 Mbps
Up Time	674.0 Sec	900.0 Sec	899.6 Sec
Retrains	0.0	2.0	0.0

Current and Last 15 Minute Bin Performance
Parameters	Last Traffic Count(Upto 15 mins)	Current Traffic Count(Upto 15 mins)
Start Time Stamp	2020-01-31T16:04:43.483+00:00	2020-01-31T16:19:43.483+00:00
Ingress Code Violation	0	0
Egress Code Violation	0	0
Errored Seconds	0	0
Severely Errored Seconds	0	0
Unavailable Seconds	0	0

[#3]

Hi could I have GEA Test please as I have changed new dsl cable (shorter one) 

[#4]

Hi @ketleystar,

I've run a GEA Test today and we're practically seeing the same results as before. Are you experiencing any issues with the services from your end of things?

GEA Test Detail
Circuit ID	NA	Service ID	REDACTED

Test Outcome	Pass
Test Outcome Code	GTC_FTTC_SERVICE_0000
Description	GEA service test completed and no fault found .
Main Fault Location	OK
Sync Status	In Sync
Downstream Speed	63.5 Mbps
Upstream Speed	20.0 Mbps
Appointment Required	N
Fault Report Advised	N
NTE Power Status	PowerOn
Voice Line Test Result	Pass
Bridge Tap	Not Detected
Radio Frequency Ingress	Not Detected
Repetitive Electrical Impulse Noise	Not Detected
Cross Talk	Not Detected
Estimated Line Length In Metres	377.3
Upstream Rate Assessment	Very Good
Downstream Rate Assessment	Reasonable
Interference Pattern	Not Detected
Service Impact	No Impact Observed
Home Wiring Problem	Not Detected
Downstream Policing Discard Rate	0.0
Customer Traffic Level	Upstream and Downstream traffic detected
Technology	VDSL
DP Type	External
Profile Name	0.128M-80M Downstream, Error Protection Off - 0.128M-20M Upstream, Error Protection Off
Time Stamp	2020-02-07T14:30:00

Parameters	MIN	MAX	AVG
Down Stream Line Rate	63.1 Mbps	63.5 Mbps	63.2 Mbps
Up Stream Line Rate	20.0 Mbps	20.0 Mbps	20.0 Mbps
Up Time	840.0 Sec	900.0 Sec	899.8 Sec
Retrains	0.0	1.0	0.0

Current and Last 15 Minute Bin Performance
Parameters	Last Traffic Count(Upto 15 mins)	Current Traffic Count(Upto 15 mins)
Start Time Stamp	2020-02-13T13:49:57.340+00:00	2020-02-13T14:04:57.340+00:00
Ingress Code Violation	0	0
Egress Code Violation	0	1
Errored Seconds	0	0
Severely Errored Seconds	0	0
Unavailable Seconds	0	0

[#5]

Thanks. My mate told me that my cabinet isn't on huawei as I am on ECI cabinet and that's why I got no chance of G.INP enabled but I have asked Bob Pullen to put me on this here: https://community.plus.net/t5/Fibre-Broadband/ECI-Cabinets/m-p/1708105/highlight/true