Download speed stats

[#1]

I've just switched out modems - I've tried BT HH 5 & 6 but they were too poor for my liking and caused too many issues. Line drops etc I've switched to an ASUS DSL-AC88U - it's done wonders for Wifi in the house and it's got 4x1Gb ports on the back - very useful.

Now I want to get my speed back up to 79Mb that I originally had. Can anyone offer some advice on these stats below. The modem is on the latest official firmware.

System Log - DSL Log

This page shows the detailed system's activities.

DSL Driver Version A2pvfbH043g.d26p

DSL Link Status Link up

DSL Uptime 4 days 19 hours 3 minutes 9 seconds

DSL modulation VDSL2

ANNEX Mode ANNEX B

Current Profile 17a

TCM(Trellis Coded Modulation) ON

Line Status	Downstream	Upstream
SNR	6.3 dB	6.1 dB
Line Attenuation	9.6 dB	0 dB
Path Mode	Interleaved	Interleaved
Interleave Depth	1963	1
Data Rate	58187 kbps	19081 kbps
MAX Rate	71197 kbps	19237 kbps
POWER	-5.8 dbm	-5.7 dbm
CRC	5	1721
HEC	74	0
ES	12	1136
INP	4.00 symbols	0 symbols

 Further information:

FTTC is available in your area.
	Speed	Max	Min
	DownStream	80000	70300
	UpStream	20000	19000

[#2]

Hi there.

Those stats indicate your router is in sync to the cabinet at 58mbps. As it's below your estimates, we can potentially raise this as a fault. However, what was your speed like with your Homehub plugged in?

It may also be worth running through the troubleshooting here

[#3]

I'll try that - but I have an openreach filtered faceplate specifically for ADSL - so I don't think it's going to make much difference. Any ideas why I am interleaved ? 

Any thoughts on G.INP or stability Adjustment ? I am connected to an Infinion Exchange.

DSL modulation	T1.413   G.lite   G.Dmt   ADSL2   ADSL2+   VDSL2   G.fast   Auto Sync-Up
ANNEX Mode	Annex A Annex A/L Annex A/M Annex A/L/M
SRA (Seamless Rate Adaptation)	Enabled   Disabled
Bitswap	Enabled   Disabled
VDSL Profile	Multi mode   35b   30a   17a   12a   12b   8a   8b   8c   8d
G.INP (G.998.4)	Enabled   Disabled
G.vector (G.993.5)	Enabled   Disabled
Stability Adjustment (ADSL)	Disabled 1 dB 2 dB 3 dB 4 dB 5 dB 6 dB 7 dB 8 dB 9 dB 10 dB 11 dB 12 dB 13 dB 14 dB 15 dB 16 dB 17 dB 18 dB 19 dB 20 dB 21 dB 22 dB 23 dB 24 dB 25 dB 26 dB 27 dB 28 dB 29 dB 30 dB    Current Downstream SNR Margin: 6.3 dB

[#4]

I have an openreach filtered faceplate specifically for ADSL - so I don't think it's going to make much difference.

The test socket would essentially bypass the faceplate of the master socket.

Any ideas why I am interleaved ? Any thoughts on G.INP or stability Adjustment ? I am connected to an Infinion Exchange.

I believe this is handled by the DLM in the exchange and we've no way of changing its settings.

If your speeds remains slow in the test socket and you've tried the Homehub again, I'd recommend reporting a fault to us at http://faults.plus.net