Connection Check Please

[#1]

Can you check my connection to see what's what please? TP-Link suggested trying a different modem to see if it improved the disconnect issue, and so i have been running on the Openreach modem for a few days. The connection speed is slower, is my connection using G.INP now? (i don't think my TP-Link modem supports that, my BTO one probably does?).

I'd be very interested to see what's going on if you could post the results please.

Many thanks.

[#2 · Accepted solution]

Here are your connection logs:

Test Outcome	Pass
Test Outcome Code	GTC_FTTC_SERVICE_0003
Description	No problem found, OAM test is not currently supported on this line.
Main Fault Location	OK
Sync Status	In Sync
Downstream Speed	48.9 Mbps
Upstream Speed	13.6 Mbps
Appointment Required	N
Fault Report Advised	N
NTE Power Status	PowerOn
Voice Line Test Result	Pass
Bridge Tap	Not Detected
Repetitive Electrical Impulse Noise	Not Detected
Estimated Line Length In Metres	735.4
Upstream Rate Assessment	Very Good
Downstream Rate Assessment	Good
Interference Pattern	Not Detected
Service Impact	No Impact Observed
Home Wiring Problem	Not Detected
Downstream Policing Discard Rate	0.0
Customer Traffic Level	Upstream and Downstream Traffic Detected
Profile Name	0.128M-55M Downstream 6dB, Retransmission Low - 0.128M-20M Upstream, Error Protection Off

[#3]

Many Thanks Chris.