cancel
Showing results for 
Search instead for 
Did you mean: 

speedtouch 716wl templates for public IP adress and VOIP

N/A

speedtouch 716wl templates for public IP adress and VOIP

Good evening,

I have a small frustrating problem with my speedtouch 716wl router
I am o the 2MB account and have a block of 8IP's (6 usable)

I found the template for making the router route all the public ip addresses
fantastic....

But now when I configure the VOIP, I always get a big red X

If I use the standard config on the router, 1 ip address and the rest is on NAT
Big relay Click, and VOIP works just fine.

Has anyone any idea why this is happening?

All help very much appreciated

Custom template ?

Thanks

James / Xyleneuk