cancel
Showing results for 
Search instead for 
Did you mean: 

Resetting SAR 110 Router

N/A

Resetting SAR 110 Router

How can you reset SAR 110 Router :?:
as the password and login are not working Sad
set wrong and cant accesss router though the http://192. way :?
Why is there no reset button Why? :roll:


How do u reset the router or bypass the login/password screen

Is there a backdoor login/password

thanks to anyone that may help in advance

[Moderators note (by Thomas): CAPS removed. Please do not use CAPS to emphasise things... use bold or italics instead. Thank you.]
14 REPLIES
N/A

Resetting SAR 110 Router

Have you tried the default username and password? It's DSL / DSL...
N/A

Resetting SAR 110 Router

plug the serial cable in, at the $ prompt type:

reboot default

the router will reboot with default config

use hyperterminal and different com ports, speed: 9600 and flow control: none - all other settings are default.
N/A

Resetting SAR 110 Router

Plug the serial cable in, at the $ prompt type:

What you mean at the $ promptHuh

Command line/RUN
Or DOS Prompt

I am running Win2K

(use HyperTerminal and different com ports, speed: 9600 and flow control: none - all other settings are default.) --- Could u plz emphasize how to go about using HyperTerminal not had to use it to reset a router or anything b4 just check a modem.

Thanks you all for your speedy responses so far

And sorry for CAPS Admin Cheesy
Community Veteran
Posts: 6,983
Thanks: 8
Registered: 10-04-2007

Resetting SAR 110 Router

You should find the hyperterminal under accessories.
It is on win98se anyway.
If it's not there you may need to install it from your windows cd.
Once you have it intalled just double click on the icon for the .exe file and you should be able to follow the instuction from mwright
N/A

Resetting SAR 110 Router

All the info you need and loads of help are on Solwise forums

http://www.solwiseforum.co.uk/
N/A

Resetting SAR 110 Router

Tried what Mrwrite said to do
Serial cable in both router and PC
9600
Nothing on flow control
Went through Com 1-14
There is no com 3
There is no $
I can’t type anything or do anything
I am connected to these com ports or so HyperTerminal says so but I cant do a thing. Sad

Why so complicated.
got this router as package from plusnet, have to pay it off over a year and it looks as if I may go out and buy a new router because i cant stand this.

No matter what com port I connect to I get no $ at all
And can’t type nothing


Any more help advise plz Smiley
Community Veteran
Posts: 3,789
Registered: 08-06-2007

Resetting SAR 110 Router

Connect the cable to the router.

Connect the cable to one of your COM ports on your computer.

Open Hyperterminal

Create a new connection on (either COM1 or COM2)

speed: 38400
No Parity
8 bit
1 stop bit

Connect.

If you get nothing on the screen, simply power-cycle the router and you should see it initialise on-screen.

when you see a $ prompt, enter:

reboot default

This will reset the router to 192.168.7.1 and the default DSL/DSL password.

Barry
N/A

Resetting SAR 110 Router

Cable Connected

Open HyperTerminal

Made a connection on COM1

Speed: 38400
No Parity
8 bit
1 stop bit
NO flow control

I then connected. I got nothing

Following Barry's advice Cheesy I power cycled the router and presto things start to appear on the screen and you see the router going through its stages. After a few seconds it on and working and sitting at the $.

Everything great so far except I cant type anything and i need to type "reboot default". I tried everything but i could not get a single character onto the HyperTerminal screen.

Did a google search on "cannot type on HyperTerminal" went to a few search results most forums talking about WinXP and typing into HyperTerminal problems but not many answers.

I am using a Win2k machine so I am thinking this XP problem is the same as what I have so i went to the website ....... http://www.hilgraeve.com and downloaded what they call "HyperTerminal PE" (Private Editions") its free upgrade and meant to be better than Win2K's default HyperTerminal.

So after installing HyperTerminal PE I went to make a new connection with the setting Barry said before. I connected. Screen was blank so I power cycled the router again and the screen became active and went through the process on router startup.

When it got to the $ I could type (could not believe it at 1st) this is with the HyperTerminal PE.

So I typed reboot default

It worked I went into router and went to do all the settings everything working 100% except every time i tried to enter the primary and secondary DNS IP's and submit I got an error but I was online and it figured out the DNS itself.

So everything is 100%

Thanks zubel(Barry), mwright, johnessex, brocco Tongue

Thanks to everyone that helped and for speedy responses

Thanks you Barry for the hint of powering on and off router once connected.... that helped a lot. ;0

I just ordered A Dlink DSL 504 ADSL router last night as well as I had given up

Lol Shocked
Such is life

I hope everyone that my lengthy response might help anyone that might be having the same problem I have had with Win2k and HyperTerminal Smiley

Thanks everyone Cheesy

P.S anyone need a Solwaise SAR110 Wink


I could not get into my router for a month and my PlusNET connection never went down.

Very Happy PlusNet Customer Cool
N/A

Resetting SAR 110 Router

You could always sell it on the For Sale forum Smiley
N/A

Resetting SAR 110 Router

lol cheers
Tongue
Community Veteran
Posts: 6,983
Thanks: 8
Registered: 10-04-2007

Resetting SAR 110 Router

Just a word of warning though. Cool
Don't loose the password on the D-Link as its a similar procedure to find it, but with a deeper dig into the innards via the parallel cable and hyperterminal.
I know I've been there Cry
N/A

Resetting SAR 110 Router

Cheers. I remember that Cool

That 2 big?
Community Veteran
Posts: 6,111
Thanks: 1
Registered: 05-04-2007

Resetting SAR 110 Router

I have split off a section of this thread. The split part can be found here.

Thomas
N/A

Resetting SAR 110 Router

That makes sense since it ws going some what off topic Shocked