cancel
Showing results for 
Search instead for 
Did you mean: 

Reply to a forum post!

pgp566
Interested
Posts: 1
Registered: ‎06-08-2021

Reply to a forum post!

Sorry for the obvious / stupid question, but I've been on forums for 40+ years (yes, really) but I cannot find any way to simply "reply" to a PlusNet forum post. For example, this excellent post by Baldrick1:

"Turning a Hub Zero into an Access Point"  There are options to do just about everything... except "reply" or indeed follow up in some way.

I must be missing some highly esoteric trick!

Thanks, Philip

3 REPLIES 3
dvorak
Moderator
Moderator
Posts: 28,520
Thanks: 6,306
Fixes: 1,459
Registered: ‎11-01-2008

Re: Reply to a forum post!

Welcome to the forum @pgp566 

The topic to which you refer to is locked and can not be replied to - that's why you can't reply to it.

If you want to thank @Baldrick1 then you can click the thumb, if you need further help start a new topic in the relevant board Smiley

Customer / Moderator
If it helped click the thumb
If it fixed it click 'This fixed my problem'
dvorak
Moderator
Moderator
Posts: 28,520
Thanks: 6,306
Fixes: 1,459
Registered: ‎11-01-2008

Re: Reply to a forum post!


Moderators Note


This topic has been moved from Chat to Community Feedback

Customer / Moderator
If it helped click the thumb
If it fixed it click 'This fixed my problem'
Baldrick1
Moderator
Moderator
Posts: 9,638
Thanks: 4,330
Fixes: 346
Registered: ‎30-06-2016

Re: Reply to a forum post!

@pgp566 

Pleased to hear that this post has been useful to you.

This more recent post may also be of interest to you if you only want an Ethernet switch rather than a Wireless Access Point.  https://community.plus.net/t5/General-Chat/The-Cost-of-That-ll-Do/m-p/1821472#M291102. Note that my costing for the switch is for a 1Gbps version, A 100Mbps version, which is equivalent to the Hub Zero is cheaper  https://www.amazon.co.uk/TP-Link-TL-SF1005D-5-Port-Desktop-Ethernet/dp/B0766D8HZ3/ref=sr_1_6?_encodi...

Moderator and Customer
If this helped - select the Thumb
If it fixed it,  help others - select 'This Fixed My Problem'